[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (280.0, 188.8) = 5 41 52.63 -2 3 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1448.7 +/- 46.1
  Background counts = 50.6
  Rate = 0.05 +/- 0.002

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 8.06'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Thu Jun 13 19:28:25 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 10.46"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.460226 pixels away
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 10.46 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 10.46"
[Fri Jun 14 05:19:14 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.067
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 10.46"
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6.csv
[Fri Jun 14 08:29:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 14.460226 pixels away
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:35 2013] Counts = 1448.702271, rescaling region sizes by 2.000000
[Fri Jun 14 14:56:35 2013] XMMSAS src. selection expression = ellipse(24314.707275, 16381.296539, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_src.reg
[Fri Jun 14 14:56:35 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (205, 114) - (355, 264)
[Fri Jun 14 14:56:35 2013] XMMSAS bgd. selection expression = annulus(24314.707275, 16381.296539, 4350.000000, 8700.000000, X, Y) && !ellipse(27114.409119, 16331.867859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18724.662567, 21361.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17231.487366, 25531.878906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21606.538840, 25239.261200, 507.770306, 507.770306, 0.000000, X, Y) && !ellipse(24230.208313, 25110.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.437400, 24968.108200, 352.871210, 352.871210, 0.000000, X, Y) && !ellipse(29357.770813, 24338.233490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y) && !ellipse(26755.191800, 23816.884000, 430.589612, 299.348809, 10.310100, X, Y) && !ellipse(19263.139679, 23270.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18129.312073, 22746.962921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33873.866791, 22248.343109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15714.062720, 22006.781000, 729.246421, 729.246421, 0.000000, X, Y) && !ellipse(28413.084500, 21477.783400, 415.100012, 415.100012, 0.000000, X, Y) && !ellipse(19248.904739, 20981.219757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32258.561000, 20665.796400, 393.944011, 393.944011, 0.000000, X, Y) && !ellipse(23570.899200, 20389.024000, 410.840012, 410.840012, 0.000000, X, Y) && !ellipse(24424.442291, 19396.614639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29932.972290, 18846.813828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.383087, 18113.952728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32931.507200, 16801.775400, 557.045616, 267.820008, 335.207055, X, Y) && !ellipse(18353.796127, 14728.775772, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6.gif
[Fri Jun 14 15:04:19 2013] Mean detx,y = (-1617.86, 11123.27) 
[Fri Jun 14 15:04:22 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:06:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:06:12 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jun 14 15:06:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Jun 14 16:28:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 16:28:59 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:51:55 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:51:55 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1839.00
[Fri Jun 14 23:51:55 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_bgd.pi.gz = 14697.00
[Fri Jun 14 23:51:55 2013] Got source and background scale factors 4534256.000000, 86006433.000000
[Fri Jun 14 23:51:55 2013] User source parameters:
  Position = (280.0, 188.8) = 5 41 52.63 -2 3 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1064.2 +/- 43.9
  Background aperture counts = 774.8
  Rate = 0.04 +/- 0.002

[Fri Jun 14 23:51:55 2013] Updating counts from extracted products
[Fri Jun 14 23:51:55 2013] Set source signif. to 1064.17/27.84 = 38.23
[Fri Jun 14 23:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:19 2013] Using photon index=1.80, rate=0.0446, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6.arf
[Fri Jun 14 23:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:19 2013] Updating source flux to 3e-13
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete