[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (281.6, 306.6) = 5 41 52.17 -1 55 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.3 +/- 15.6
  Background counts = 68.6
  Rate = 0.005 +/- 0.0007

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 1.36'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 7.11"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 50 centroid is now closest to src. 8
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 7.11 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 7.11"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.098
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 7.11"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Warning, spatial fit 49 centroid is now closest to src. 8
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:37 2013] XMMSAS src. selection expression = ellipse(24451.056305, 26629.343231, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:37 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_src.reg
[Fri Jun 14 14:56:37 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (244, 269) - (319, 344)
[Fri Jun 14 14:56:37 2013] XMMSAS bgd. selection expression = annulus(24451.056305, 26629.343231, 1087.500000, 2175.000000, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(23365.794495, 26800.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.008911, 28199.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.900024, 28374.263000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.252441, 27737.260406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(25627.838600, 25771.178800, 419.721612, 419.721612, 0.000000, X, Y) && !ellipse(25688.370000, 25769.868000, 438.058413, 355.128810, 0.025395, X, Y) && !ellipse(24230.208313, 25110.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y)
[Fri Jun 14 14:56:37 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54.gif
[Fri Jun 14 15:38:48 2013] Mean detx,y = (-2768.40, 920.98) 
[Fri Jun 14 15:38:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:39:01 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:39:01 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Fri Jun 14 15:39:01 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Fri Jun 14 18:45:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 18:45:31 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:06 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:06 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 379.00
[Fri Jun 14 23:52:06 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_bgd.pi.gz = 695.00
[Fri Jun 14 23:52:06 2013] Got source and background scale factors 1058916.000000, 2590031.000000
[Fri Jun 14 23:52:06 2013] User source parameters:
  Position = (281.6, 306.6) = 5 41 52.17 -1 55 17.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 94.9 +/- 20.5
  Background aperture counts = 284.1
  Rate = 0.004 +/- 0.0009

[Fri Jun 14 23:52:06 2013] Updating counts from extracted products
[Fri Jun 14 23:52:06 2013] Set source signif. to 94.85/16.86 = 5.63
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00398, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 1.9e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete