[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (359.6, 317.7) = 5 41 29.54 -1 54 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 188.1 +/- 18.2
  Background counts = 69.2
  Rate = 0.01 +/- 0.001

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 4.65'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Thu Jun 13 19:28:25 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 8.75"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Source 49 is offset by 0.019894 and -1.029464 pixels which is larger than
2 X fitted extent = 2.469899 x 1.006051, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Fri Jun 14 05:19:14 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 8.75"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Source 49 is offset by 0.030827 and -1.045597 pixels which is larger than
2 X fitted extent = 2.475618 x 1.022598, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(31236.296967, 27588.823029, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (322, 280) - (397, 355)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(31236.296967, 27588.823029, 1087.500000, 2175.000000, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222000, 29196.362000, 515.424015, 398.710411, 12.578100, X, Y) && !ellipse(28783.594177, 28629.522827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.341064, 29713.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29910.931400, 28962.824200, 531.907215, 412.006412, 26.735900, X, Y) && !ellipse(30555.435944, 28382.214813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.879791, 27852.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.740753, 27709.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.261536, 27628.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49.gif
[Fri Jun 14 15:31:23 2013] Mean detx,y = (4103.06, -707.51) 
[Fri Jun 14 15:31:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:31:49 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:31:50 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jun 14 15:31:50 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Jun 14 18:01:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 18:01:10 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:04 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:04 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 344.00
[Fri Jun 14 23:52:04 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 1326.00
[Fri Jun 14 23:52:04 2013] Got source and background scale factors 932105.000000, 6477915.000000
[Fri Jun 14 23:52:04 2013] User source parameters:
  Position = (359.6, 317.7) = 5 41 29.54 -1 54 25.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 153.2 +/- 19.6
  Background aperture counts = 190.8
  Rate = 0.006 +/- 0.0008

[Fri Jun 14 23:52:04 2013] Updating counts from extracted products
[Fri Jun 14 23:52:04 2013] Set source signif. to 153.20/13.81 = 11.09
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00642, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 3.2e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete