[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (336.5, 319.1) = 5 41 36.24 -1 54 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 556.8 +/- 34.0
  Background counts = 77.6
  Rate = 0.02 +/- 0.001

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 3.14'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.914
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 8.00"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 43 centroid is now closest to src. 50
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:20 2013] Source is confused with source 50
[Fri Jun 14 05:18:20 2013] Source is confused with source 51
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 8.00"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.914
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.00"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Warning, spatial fit 42 centroid is now closest to src. 50
[Fri Jun 14 14:55:44 2013] Spatial fit model total counts = 1794.390000, observed total counts = 1365.000000
[Fri Jun 14 14:55:44 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(29227.740753, 27709.204712, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (299, 282) - (374, 357)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(29227.740753, 27709.204712, 1087.500000, 2175.000000, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222000, 29196.362000, 515.424015, 398.710411, 12.578100, X, Y) && !ellipse(28783.594177, 28629.522827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(29102.341064, 29713.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.115234, 28790.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29910.931400, 28962.824200, 531.907215, 412.006412, 26.735900, X, Y) && !ellipse(30555.435944, 28382.214813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.879791, 27852.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.296967, 27588.823029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.261536, 27628.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47.gif
[Fri Jun 14 15:30:20 2013] Mean detx,y = (1905.74, -596.46) 
[Fri Jun 14 15:30:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:30:42 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:30:42 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 14 15:30:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Jun 14 17:55:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 17:55:45 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:04 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:04 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 2061.00
[Fri Jun 14 23:52:04 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_bgd.pi.gz = 442.00
[Fri Jun 14 23:52:04 2013] Got source and background scale factors 1117112.000000, 1070875.000000
[Fri Jun 14 23:52:04 2013] User source parameters:
  Position = (336.5, 319.1) = 5 41 36.24 -1 54 24.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1599.9 +/- 46.4
  Background aperture counts = 461.1
  Rate = 0.07 +/- 0.002

[Fri Jun 14 23:52:04 2013] Updating counts from extracted products
[Fri Jun 14 23:52:04 2013] Set source signif. to 1599.92/21.47 = 74.51
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.067, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 2.5e-13
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete