[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (326.4, 320.7) = 5 41 39.19 -1 54 13.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 665.6 +/- 34.8
  Background counts = 78.6
  Rate = 0.03 +/- 0.002

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 2.59'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.207
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 7.72"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 42 centroid is now closest to src. 53
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:20 2013] Source is confused with source 51
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 7.72"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.207
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 7.72"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:44 2013] Warning, spatial fit 41 centroid is now closest to src. 53
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(28344.879791, 27852.377167, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (289, 283) - (364, 358)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(28344.879791, 27852.377167, 1087.500000, 2175.000000, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222000, 29196.362000, 515.424015, 398.710411, 12.578100, X, Y) && !ellipse(28783.594177, 28629.522827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(29102.341064, 29713.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.115234, 28790.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29910.931400, 28962.824200, 531.907215, 412.006412, 26.735900, X, Y) && !ellipse(30555.435944, 28382.214813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.008911, 28199.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.740753, 27709.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.296967, 27588.823029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.261536, 27628.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46.gif
[Fri Jun 14 15:29:51 2013] Mean detx,y = (1292.95, -670.58) 
[Fri Jun 14 15:29:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:30:11 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:30:11 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri Jun 14 15:30:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri Jun 14 17:50:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 17:50:25 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:03 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:03 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 2318.00
[Fri Jun 14 23:52:03 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 161.00
[Fri Jun 14 23:52:04 2013] Got source and background scale factors 1098254.000000, 456349.000000
[Fri Jun 14 23:52:04 2013] User source parameters:
  Position = (326.4, 320.7) = 5 41 39.19 -1 54 13.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1930.5 +/- 49.2
  Background aperture counts = 387.5
  Rate = 0.08 +/- 0.002

[Fri Jun 14 23:52:04 2013] Updating counts from extracted products
[Fri Jun 14 23:52:04 2013] Set source signif. to 1930.54/19.68 = 98.08
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.0809, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 3e-13
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete