[Thu Jun 13 19:25:09 2013] Detection parameters:
  Position = (293.5, 324.7) = 5 41 48.72 -1 53 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.1 +/- 18.7
  Background counts = 71.9
  Rate = 0.006 +/- 0.0006

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 1.94'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.291
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 7.40"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 13 22:01:22 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu Jun 13 22:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu Jun 13 22:01:22 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Source 44 is offset by 4.856884 and 1.970726 pixels which is larger than
2 X fitted extent = 0.850230 x 0.850230, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.291
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 39 for pass 1, mean size = 7.40"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Source 44 is offset by 0.228939 and -3.572076 pixels which is larger than
2 X fitted extent = 3.178805 x 3.178805, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(25487.008911, 28199.867401, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (256, 287) - (331, 362)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(25487.008911, 28199.867401, 1087.500000, 2175.000000, X, Y) && !ellipse(26498.060300, 30737.162200, 693.644020, 467.766413, 113.139481, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(23365.794495, 26800.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.115234, 28790.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.900024, 28374.263000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.879791, 27852.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.252441, 27737.260406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(24451.056305, 26629.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(25627.838600, 25771.178800, 419.721612, 419.721612, 0.000000, X, Y) && !ellipse(25688.370000, 25769.868000, 438.058413, 355.128810, 0.025395, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44.gif
[Fri Jun 14 15:28:54 2013] Mean detx,y = (-1625.78, -758.42) 
[Fri Jun 14 15:28:56 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:29:13 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:29:13 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Jun 14 15:29:13 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Jun 14 17:49:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 17:49:52 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:03 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:03 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_src_b10.pi.gz = 413.00
[Fri Jun 14 23:52:03 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_bgd.pi.gz = 687.00
[Fri Jun 14 23:52:03 2013] Got source and background scale factors 885314.000000, 3055756.000000
[Fri Jun 14 23:52:03 2013] User source parameters:
  Position = (293.5, 324.7) = 5 41 48.72 -1 53 48.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 214.0 +/- 21.3
  Background aperture counts = 199.0
  Rate = 0.009 +/- 0.0009

[Fri Jun 14 23:52:03 2013] Updating counts from extracted products
[Fri Jun 14 23:52:03 2013] Set source signif. to 213.96/14.11 = 15.17
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00897, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 4.7e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src44_pl.csv not found, spectral fit skipped or did not complete