[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (331.4, 329.6) = 5 41 37.72 -1 53 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2078.3 +/- 75.0
  Background counts = 77.8
  Rate = 0.1 +/- 0.004

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 3.29'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Thu Jun 13 19:28:25 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 8.07"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Source 4 is offset by 0.160951 and 4.498584 pixels which is larger than
2 X fitted extent = 7.383035 x 2.984855, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Source 4 is offset by 1.262140 and -6.510496 pixels which is larger than
2 X fitted extent = 2.938051 x 2.283766, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:20 2013] Source is confused with source 3
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 8.07 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 8.07"
[Fri Jun 14 05:19:14 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.901
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 8.07"
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4.csv
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 14 08:29:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4.csv
[Fri Jun 14 08:29:48 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Source 4 is offset by 0.090754 and 3.484010 pixels which is larger than
2 X fitted extent = 2.712612 x 2.712612, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:35 2013] Counts = 2078.343018, rescaling region sizes by 2.000000
[Fri Jun 14 14:56:35 2013] XMMSAS src. selection expression = ellipse(28783.594177, 28629.522827, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 14 14:56:35 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (256, 255) - (406, 405)
[Fri Jun 14 14:56:35 2013] XMMSAS bgd. selection expression = annulus(28783.594177, 28629.522827, 4350.000000, 8700.000000, X, Y) && !ellipse(26498.060300, 30737.162200, 693.644020, 467.766413, 113.139481, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28674.222000, 29196.362000, 515.424015, 398.710411, 12.578100, X, Y) && !ellipse(26439.352000, 27916.988000, 1120.976032, 581.597617, 103.098000, X, Y) && !ellipse(23365.794495, 26800.972290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30127.532837, 35186.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28264.320892, 37699.116180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.955902, 37195.372162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26968.358612, 36868.986755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.196167, 36638.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.581604, 35866.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.676727, 35382.804901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.302765, 35193.756195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.767487, 33698.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32820.673000, 33510.905600, 533.336815, 406.808812, 37.927000, X, Y) && !ellipse(28886.481873, 33132.943695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.795593, 33016.273743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31478.977264, 32982.700897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25975.072327, 32295.619141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33349.376000, 32176.884400, 360.241610, 360.241610, 0.000000, X, Y) && !ellipse(28545.159271, 32225.600708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29102.341064, 29713.212860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20324.577911, 29567.042877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.115234, 28790.595490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.695587, 28801.239502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36130.960297, 28750.467377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29910.931400, 28962.824200, 531.907215, 412.006412, 26.735900, X, Y) && !ellipse(30555.435944, 28382.214813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25487.008911, 28199.867401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23064.900024, 28374.263000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28344.879791, 27852.377167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29227.740753, 27709.204712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23126.252441, 27737.260406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31236.296967, 27588.823029, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29755.950867, 27377.270294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28785.261536, 27628.244904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26137.382233, 27283.664581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27488.085200, 27267.185800, 1178.184034, 880.672025, 84.470510, X, Y) && !ellipse(24451.056305, 26629.343231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26742.206000, 26711.952000, 1062.440031, 1062.440031, 0.000000, X, Y) && !ellipse(28595.708374, 26295.964478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29479.484000, 25508.158000, 294.554408, 294.554408, 0.000000, X, Y) && !ellipse(25627.838600, 25771.178800, 419.721612, 419.721612, 0.000000, X, Y) && !ellipse(21606.538840, 25239.261200, 507.770306, 507.770306, 0.000000, X, Y) && !ellipse(25688.370000, 25769.868000, 438.058413, 355.128810, 0.025395, X, Y) && !ellipse(24230.208313, 25110.077057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27055.437400, 24968.108200, 352.871210, 352.871210, 0.000000, X, Y) && !ellipse(29357.770813, 24338.233490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26687.785800, 23951.857800, 1217.048035, 459.720013, 65.799500, X, Y) && !ellipse(26755.191800, 23816.884000, 430.589612, 299.348809, 10.310100, X, Y) && !ellipse(19263.139679, 23270.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33873.866791, 22248.343109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28413.084500, 21477.783400, 415.100012, 415.100012, 0.000000, X, Y) && !ellipse(19248.904739, 20981.219757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32258.561000, 20665.796400, 393.944011, 393.944011, 0.000000, X, Y) && !ellipse(23570.899200, 20389.024000, 410.840012, 410.840012, 0.000000, X, Y) && !ellipse(24424.442291, 19396.614639, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 14 15:00:50 2013] Mean detx,y = (1475.23, -1502.91) 
[Fri Jun 14 15:00:54 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:01:56 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:01:57 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 14 15:01:57 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 14 15:59:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 15:59:48 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:51:55 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:51:55 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 10216.00
[Fri Jun 14 23:51:55 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 20444.00
[Fri Jun 14 23:51:55 2013] Got source and background scale factors 4464520.000000, 124033013.000000
[Fri Jun 14 23:51:55 2013] User source parameters:
  Position = (331.4, 329.6) = 5 41 37.72 -1 53 51.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 9480.1 +/- 102.1
  Background aperture counts = 735.9
  Rate = 0.4 +/- 0.004

[Fri Jun 14 23:51:55 2013] Updating counts from extracted products
[Fri Jun 14 23:51:55 2013] Set source signif. to 9480.13/27.13 = 349.47
[Fri Jun 14 23:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:19 2013] Using photon index=1.80, rate=0.397, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4.arf
[Fri Jun 14 23:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:19 2013] Updating source flux to 1.4e-12
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete