[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (299.1, 371.8) = 5 41 47.09 -1 50 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.5 +/- 15.3
  Background counts = 61.4
  Rate = 0.005 +/- 0.0008

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 5.32'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Thu Jun 13 19:28:25 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 9.09"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src31.ximg exists
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src31_1.ximg exists
[Thu Jun 13 22:01:20 2013] Fit fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src31 appears to have run properly
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Thu Jun 13 22:01:21 2013] Fit fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Jun 14 05:18:20 2013] Source 33 is offset by 7.754188 and -0.595849 pixels which is larger than
2 X fitted extent = 1.079085 x 1.079085, not incorporating fit results
[Fri Jun 14 05:18:20 2013] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.787664 pixels away
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 9.09"
[Fri Jun 14 05:19:14 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 30 for pass 1, mean size = 9.09"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Source 33 is offset by 6.999590 and 6.087048 pixels which is larger than
2 X fitted extent = 1.055761 x 1.055761, not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(25975.072327, 32295.619141, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (262, 334) - (337, 409)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(25975.072327, 32295.619141, 1087.500000, 2175.000000, X, Y) && !ellipse(26498.060300, 30737.162200, 693.644020, 467.766413, 113.139481, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.302765, 35193.756195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.767487, 33698.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28886.481873, 33132.943695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26080.795593, 33016.273743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28545.159271, 32225.600708, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33.gif
[Fri Jun 14 15:19:57 2013] Mean detx,y = (-1596.93, -4950.78) 
[Fri Jun 14 15:19:59 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:20:14 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:20:15 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 14 15:20:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun 14 16:38:24 2013] Not generating rmf since there are only 89 counts
[Fri Jun 14 16:38:24 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:01 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:01 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 308.00
[Fri Jun 14 23:52:01 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 1171.00
[Fri Jun 14 23:52:01 2013] Got source and background scale factors 1178058.000000, 6135347.000000
[Fri Jun 14 23:52:01 2013] User source parameters:
  Position = (299.1, 371.8) = 5 41 47.09 -1 50 34.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 83.2 +/- 18.6
  Background aperture counts = 224.8
  Rate = 0.003 +/- 0.0008

[Fri Jun 14 23:52:01 2013] Updating counts from extracted products
[Fri Jun 14 23:52:01 2013] Set source signif. to 83.15/14.99 = 5.55
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00348, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 1.8e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete