[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (300.3, 380.1) = 5 41 46.74 -1 49 58.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.2 +/- 20.2
  Background counts = 58.9
  Rate = 0.01 +/- 0.001

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 5.92'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Thu Jun 13 19:28:25 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.061
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 29 for pass 0, mean size = 9.39"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Spatial fit model total counts = 1086.790000, observed total counts = 492.000000
[Fri Jun 14 05:18:20 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 29 centroid is now closest to src. 33
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 9.39"
[Fri Jun 14 05:19:14 2013] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.061
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.39"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Spatial fit model total counts = 622.377000, observed total counts = 501.000000
[Fri Jun 14 14:55:43 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:36 2013] XMMSAS src. selection expression = ellipse(26080.795593, 33016.273743, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 14 14:56:36 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (263, 343) - (338, 418)
[Fri Jun 14 14:56:36 2013] XMMSAS bgd. selection expression = annulus(26080.795593, 33016.273743, 1087.500000, 2175.000000, X, Y) && !ellipse(26498.060300, 30737.162200, 693.644020, 467.766413, 113.139481, X, Y) && !ellipse(28369.380402, 30471.218414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.581604, 35866.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.676727, 35382.804901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.302765, 35193.756195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.767487, 33698.151642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28886.481873, 33132.943695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25975.072327, 32295.619141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28545.159271, 32225.600708, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:36 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31.gif
[Fri Jun 14 15:18:55 2013] Mean detx,y = (-1629.37, -5642.85) 
[Fri Jun 14 15:18:57 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:19:18 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:19:18 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 14 15:19:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jun 14 16:37:57 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 16:37:57 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:00 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:00 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 403.00
[Fri Jun 14 23:52:00 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 1067.00
[Fri Jun 14 23:52:00 2013] Got source and background scale factors 1199368.000000, 6581418.000000
[Fri Jun 14 23:52:00 2013] User source parameters:
  Position = (300.3, 380.1) = 5 41 46.74 -1 49 58.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 208.6 +/- 21.1
  Background aperture counts = 194.4
  Rate = 0.009 +/- 0.0009

[Fri Jun 14 23:52:00 2013] Updating counts from extracted products
[Fri Jun 14 23:52:00 2013] Set source signif. to 208.55/13.94 = 14.96
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00874, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 4.6e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete