[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (475.8, 415.1) = 5 40 55.84 -1 47 27.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 105.0 +/- 13.3
  Background counts = 36.8
  Rate = 0.004 +/- 0.0005

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 15.39'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Thu Jun 13 19:28:25 2013] source mask rpix=3.2, npix_max = 56, mask sum = 35, frac = 0.623
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 14.12"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning: source 21 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 16.281035 pixels away
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Fri Jun 14 05:19:14 2013] source mask rpix=3.2, npix_max = 56, mask sum = 35, frac = 0.623
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 14.12"
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.609353 pixels away
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:35 2013] XMMSAS src. selection expression = ellipse(41342.549164, 36066.586456, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_src.reg
[Fri Jun 14 14:56:35 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (438, 378) - (513, 453)
[Fri Jun 14 14:56:35 2013] XMMSAS bgd. selection expression = annulus(41342.549164, 36066.586456, 1087.500000, 2175.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23.gif
[Fri Jun 14 15:15:28 2013] Mean detx,y = (13068.35, -10129.42) 
[Fri Jun 14 15:15:30 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:15:51 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:15:52 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jun 14 15:15:52 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jun 14 16:34:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 16:34:27 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:51:59 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:51:59 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 136.00
[Fri Jun 14 23:51:59 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 644.00
[Fri Jun 14 23:51:59 2013] Got source and background scale factors 660660.000000, 5183659.000000
[Fri Jun 14 23:51:59 2013] User source parameters:
  Position = (475.8, 415.1) = 5 40 55.84 -1 47 27.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 53.9 +/- 12.7
  Background aperture counts = 82.1
  Rate = 0.002 +/- 0.0005

[Fri Jun 14 23:51:59 2013] Updating counts from extracted products
[Fri Jun 14 23:51:59 2013] Set source signif. to 53.92/9.06 = 5.95
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00226, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 1.8e-13
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete