[Thu Jun 13 19:25:08 2013] Detection parameters:
  Position = (329.0, 428.1) = 5 41 38.41 -1 46 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.3 +/- 15.0
  Background counts = 52.9
  Rate = 0.004 +/- 0.0005

[Thu Jun 13 19:25:10 2013] Off-axis axis estimate = 9.66'
[Thu Jun 13 19:28:25 2013] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 19:28:25 2013] Initial guess for spatial extent in simple fitting = 11.26"
[Thu Jun 13 19:28:25 2013] source mask rpix=2.6, npix_max = 38, mask sum = 21, frac = 0.551
[Thu Jun 13 19:28:25 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 11.26"
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19.csv
[Thu Jun 13 22:01:20 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu Jun 13 22:01:20 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19.csv
[Thu Jun 13 22:01:20 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jun 13 22:01:21 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu Jun 13 22:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu Jun 13 22:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:20 2013] Warning, spatial fit 19 centroid is now closest to src. 22
[Fri Jun 14 05:18:20 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:20 2013] Assessing source extent using major
[Fri Jun 14 05:18:20 2013] Source does appear to be extended
[Fri Jun 14 05:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:20 2013] Source is confused with source 19
[Fri Jun 14 05:19:14 2013] Using EEF radius (= 11.26 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 05:19:14 2013] Initial guess for spatial extent in simple fitting = 11.26"
[Fri Jun 14 05:19:14 2013] source mask rpix=2.6, npix_max = 38, mask sum = 21, frac = 0.551
[Fri Jun 14 05:19:14 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.26"
[Fri Jun 14 08:29:48 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 08:29:49 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri Jun 14 08:29:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18.csv
[Fri Jun 14 08:29:49 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun 14 08:29:50 2013] fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Jun 14 08:29:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18.csv
[Fri Jun 14 08:29:50 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:43 2013] Source 20 is offset by -6.471748 and -0.308711 pixels which is larger than
2 X fitted extent = 4.566064 x 1.314368, not incorporating fit results
[Fri Jun 14 14:55:43 2013] Warning, spatial fit 18 centroid is now closest to src. 19
[Fri Jun 14 14:55:44 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:44 2013] Assessing source extent using major
[Fri Jun 14 14:55:44 2013] Source does appear to be extended
[Fri Jun 14 14:55:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 14:56:35 2013] XMMSAS src. selection expression = ellipse(28576.955902, 37195.372162, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing source region out to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_src.reg
[Fri Jun 14 14:56:35 2013] Extracting stamp from image fullrun_pn_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (292, 391) - (367, 466)
[Fri Jun 14 14:56:35 2013] XMMSAS bgd. selection expression = annulus(28576.955902, 37195.372162, 1087.500000, 2175.000000, X, Y) && !ellipse(30127.532837, 35186.088470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26634.387787, 38426.801300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28264.320892, 37699.116180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26968.358612, 36868.986755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28932.196167, 36638.957672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29070.581604, 35866.182190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.676727, 35382.804901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28837.302765, 35193.756195, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 14:56:35 2013] Writing fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20.gif
[Fri Jun 14 15:14:25 2013] Mean detx,y = (411.33, -10018.12) 
[Fri Jun 14 15:14:28 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 15:14:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 15:14:36 2013] Setting source spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Jun 14 15:14:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Jun 14 16:34:01 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 16:34:01 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:51:58 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:51:58 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_src_b10.pi.gz = 349.00
[Fri Jun 14 23:51:58 2013] Total counts from fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_bgd.pi.gz = 726.00
[Fri Jun 14 23:51:58 2013] Got source and background scale factors 1038835.000000, 4593337.000000
[Fri Jun 14 23:51:58 2013] User source parameters:
  Position = (329.0, 428.1) = 5 41 38.41 -1 46 30.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 184.8 +/- 19.7
  Background aperture counts = 164.2
  Rate = 0.008 +/- 0.0008

[Fri Jun 14 23:51:58 2013] Updating counts from extracted products
[Fri Jun 14 23:51:58 2013] Set source signif. to 184.81/12.81 = 14.42
[Fri Jun 14 23:52:22 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:22 2013] Using photon index=1.80, rate=0.00774, arf fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20.arf
[Fri Jun 14 23:52:22 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:22 2013] Updating source flux to 5.9e-14
[Fri Jun 14 23:53:34 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:45 2013] xmm0112640101/analysis//spectral/fullrun_pn_xmm0112640101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete