[Thu Jun 13 19:26:32 2013] Detection parameters:
  Position = (505.5, 271.4) = 5 40 47.21 -1 57 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.2 +/- 11.0
  Background counts = 19.2
  Rate = 0.002 +/- 0.0003

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 15.14'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Jun 14 01:13:38 2013] source mask rpix=3.2, npix_max = 55, mask sum = 29, frac = 0.524
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 14.00"
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Warning, spatial fit 80 centroid is now closest to src. 1
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Fri Jun 14 11:22:09 2013] source mask rpix=3.2, npix_max = 55, mask sum = 29, frac = 0.524
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 14.00"
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78.csv
[Fri Jun 14 14:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 10.211010 pixels away
[Fri Jun 14 14:56:13 2013] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 13.984200 pixels away
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:56 2013] XMMSAS src. selection expression = ellipse(43929.986725, 23562.232147, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_src.reg
[Fri Jun 14 21:35:56 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (468, 234) - (543, 309)
[Fri Jun 14 21:35:56 2013] XMMSAS bgd. selection expression = annulus(43929.986725, 23562.232147, 1087.500000, 2175.000000, X, Y) && !ellipse(44126.283661, 24932.081238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44191.918640, 25348.987213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44231.093597, 26433.946350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41020.698547, 20942.170914, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81.gif
[Fri Jun 14 22:03:49 2013] Mean detx,y = (-16754.54, -1896.13) 
[Fri Jun 14 22:03:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:03:58 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:03:58 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Fri Jun 14 22:03:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Fri Jun 14 23:50:06 2013] Not generating rmf since there are only 63 counts
[Fri Jun 14 23:50:06 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:49 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:49 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_src_b10.pi.gz = 197.00
[Fri Jun 14 23:52:49 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_bgd.pi.gz = 516.00
[Fri Jun 14 23:52:49 2013] Got source and background scale factors 670662.000000, 4390146.000000
[Fri Jun 14 23:52:49 2013] User source parameters:
  Position = (505.5, 271.4) = 5 40 47.21 -1 57 54.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 118.2 +/- 15.1
  Background aperture counts = 78.8
  Rate = 0.004 +/- 0.0005

[Fri Jun 14 23:52:49 2013] Updating counts from extracted products
[Fri Jun 14 23:52:49 2013] Set source signif. to 118.17/8.88 = 13.31
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00362, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Getting flux using calc_pl_flux failed
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete