[Thu Jun 13 19:26:32 2013] Detection parameters:
  Position = (311.5, 287.1) = 5 41 43.50 -1 56 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 257.2 +/- 20.6
  Background counts = 23.1
  Rate = 0.008 +/- 0.0007

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 1.25'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 7.05 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 7.05"
[Fri Jun 14 01:13:38 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.111
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 7.05"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Source 76 is offset by -6.006625 and 5.619021 pixels which is larger than
2 X fitted extent = 0.810832 x 0.810832, not incorporating fit results
[Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 794.358000, observed total counts = 790.000000
[Fri Jun 14 05:18:53 2013] Offset between fit and detection position for source 76 = 2.348077 pixels
[Fri Jun 14 05:18:53 2013] Warning, changing simple spatial fit ID from 34 to 62
[Fri Jun 14 05:18:53 2013] 769.781000 total counts/ 522.343000 bgd. counts: snr = 10.826511
Spatial fit parameters:
  Offset between fit and detection position for source 76 = 2.348077 pixels
  Position = (309.2, 287.6) = 5 41 44.17 -1 56 42.1
  Extent = 13.4 (13.4-26.9)", rotation angle = 0
  Source counts = 247.4 +/- 27.7
  Background counts = 522.3
  Rate = 0.008 +/- 0.0009
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:53 2013] Source is confused with source 73
[Fri Jun 14 05:18:53 2013] Source is confused with source 78
[Fri Jun 14 05:18:53 2013] Source is confused with source 77
[Fri Jun 14 11:22:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 13.44"
[Fri Jun 14 11:22:09 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.951
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 13.44"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src34.ximg exists
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src34_1.ximg exists
[Fri Jun 14 14:55:25 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src34 appears to have run properly
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Fri Jun 14 14:55:26 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src34 appears to have run properly
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 34 centroid is now closest to src. 78
[Fri Jun 14 14:56:13 2013] Source 76 is offset by -4.601287 and 5.815747 pixels which is larger than
2 X fitted extent = 0.847412 x 0.847412, not incorporating fit results
[Fri Jun 14 14:56:13 2013] Source 76 is offset by -2.322529 and 1.000667 pixels which is larger than
2 X fitted extent = 2.422377 x 0.824299, not incorporating fit results
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(26849.986000, 24972.268000, 806.226023, 806.226023, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (263, 241) - (356, 334)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(26849.986000, 24972.268000, 1343.710039, 2687.420077, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(25630.271600, 25760.076400, 382.754411, 382.754411, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.168518, 26948.939728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.020000, 28037.638000, 1199.040035, 1199.040035, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(26746.775177, 26571.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29355.612274, 24344.982574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24214.559570, 25094.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.400696, 28438.143005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.089081, 23800.852905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.669000, 25302.344000, 377.796011, 144.176004, 32.800200, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(23960.406891, 26674.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28605.863861, 26264.356354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.592400, 25775.636000, 1209.432035, 337.584010, 92.264860, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.935394, 24711.684601, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76.gif
[Fri Jun 14 21:47:24 2013] Mean detx,y = (210.46, -2443.67) 
[Fri Jun 14 21:47:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:47:35 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:47:35 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Fri Jun 14 21:47:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Fri Jun 14 23:52:43 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:43 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_src_b10.pi.gz = 659.00
[Fri Jun 14 23:52:43 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_bgd.pi.gz = 822.00
[Fri Jun 14 23:52:43 2013] Got source and background scale factors 1958648.000000, 6091992.000000
[Fri Jun 14 23:52:43 2013] User source parameters:
  Position = (309.2, 287.6) = 5 41 44.17 -1 56 42.1
  Extent = 13.4 (13.4-26.9)", rotation angle = 0
  Source aperture counts = 394.7 +/- 26.7
  Background aperture counts = 264.3
  Rate = 0.01 +/- 0.0008

[Fri Jun 14 23:52:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:50 2013] Using photon index=1.80, rate=0.00759, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76.arf
[Fri Jun 14 23:52:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:50 2013] Updating source flux to 9.3e-14
[Fri Jun 14 23:53:17 2013] Flag b found in src. 76 procflags, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] Flag c found in src. 76 procflags, skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src76_pl.csv not found, spectral fit skipped or did not complete