[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (302.8, 291.7) = 5 41 46.03 -1 56 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 15.6
  Background counts = 23.3
  Rate = 0.004 +/- 0.0005

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 0.58'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 6.72 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 6.72"
[Fri Jun 14 01:13:38 2013] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.957
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 6.72"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src62.ximg exists
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src62_1.ximg exists
[Fri Jun 14 05:18:00 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src62 appears to have run properly
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Fri Jun 14 05:18:02 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Fri Jun 14 05:18:53 2013] Warning, spatial fit 62 centroid is now closest to src. 76
[Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 437.043000, observed total counts = 436.000000
[Fri Jun 14 05:18:53 2013] Offset between fit and detection position for source 73 = 0.339775 pixels
[Fri Jun 14 05:18:53 2013] Warning, changing simple spatial fit ID from 62 to 88
[Fri Jun 14 05:18:53 2013] 455.107800 total counts/ 407.233000 bgd. counts: snr = 2.372387
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.339775 pixels
  Position = (302.8, 291.4) = 5 41 46.01 -1 56 25.6
  Extent = 4.8 (3.1-7.4)" x 1.7 (1.7-2.7)", rotation angle = 32 (17-50) degrees
  Source counts = 47.9 +/- 21.3
  Background counts = 407.2
  Rate = 0.001 +/- 0.0007
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri Jun 14 05:18:53 2013] Source is confused with source 76
[Fri Jun 14 11:22:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 3.29"
[Fri Jun 14 11:22:09 2013] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.951
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 3.29"
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri Jun 14 14:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Spatial fit model total counts = 533.396000, observed total counts = 785.000000
[Fri Jun 14 14:56:13 2013] Poor agreement between spatial fit and data for source 73
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 14:56:14 2013] Spatial fit model total counts = 438.106000, observed total counts = 436.000000
[Fri Jun 14 14:56:14 2013] Offset between fit and detection position for source 73 = 0.007507 pixels
[Fri Jun 14 14:56:14 2013] Warning, changing simple spatial fit ID from 62 to 85
[Fri Jun 14 14:56:14 2013] 449.822100 total counts/ 401.290000 bgd. counts: snr = 2.422702
Spatial fit parameters:
  Offset between fit and detection position for source 73 = 0.007507 pixels
  Position = (302.8, 291.4) = 5 41 46.01 -1 56 25.6
  Extent = 4.7 (3.1-7.5)" x 1.8 (1.7-2.7)", rotation angle = 33 (16-49) degrees
  Source counts = 48.5 +/- 21.2
  Background counts = 401.3
  Rate = 0.001 +/- 0.0007
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.14
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(26298.669000, 25302.344000, 283.347008, 108.132003, 32.800200, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (287, 275) - (319, 308)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(26298.669000, 25302.344000, 472.245014, 944.490027, X, Y) && !ellipse(25630.271600, 25760.076400, 382.754411, 382.754411, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(27435.168518, 26948.939728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26849.986000, 24972.268000, 1074.968031, 1074.968031, 0.000000, X, Y) && !ellipse(26746.775177, 26571.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.089081, 23800.852905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(26239.935394, 24711.684601, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73.gif
[Fri Jun 14 21:55:38 2013] Mean detx,y = (741.96, -2190.46) 
[Fri Jun 14 21:55:39 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:55:45 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:55:45 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Fri Jun 14 21:55:45 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Fri Jun 14 23:45:06 2013] Not generating rmf since there are only 48 counts
[Fri Jun 14 23:45:06 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:47 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:47 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 74.00
[Fri Jun 14 23:52:47 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_bgd.pi.gz = 10.00
[Fri Jun 14 23:52:47 2013] Got source and background scale factors 91200.000000, 67980.000000
[Fri Jun 14 23:52:47 2013] User source parameters:
  Position = (302.8, 291.4) = 5 41 46.01 -1 56 25.6
  Extent = 4.7 (3.1-7.5)" x 1.8 (1.7-2.7)", rotation angle = 33 (16-49) degrees
  Source aperture counts = 60.6 +/- 9.6
  Background aperture counts = 13.4
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00149, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 3.1e-14
[Fri Jun 14 23:53:17 2013] Flag p found in src. 73 procflags, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] Flag c found in src. 73 procflags, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] Source 73 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete