[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (451.1, 303.7) = 5 41 2.99 -1 55 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.3 +/- 12.7
  Background counts = 17.6
  Rate = 0.003 +/- 0.0004

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 11.08'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 14 01:13:38 2013] source mask rpix=2.8, npix_max = 42, mask sum = 38, frac = 0.899
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 11.97"
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 270.061000, observed total counts = 244.000000
[Fri Jun 14 05:18:53 2013] Poor agreement between spatial fit and data for source 65
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 11.97 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 11.97"
[Fri Jun 14 11:22:09 2013] source mask rpix=2.8, npix_max = 42, mask sum = 38, frac = 0.899
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 11.97"
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src70.ximg exists
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src70_1.ximg exists
[Fri Jun 14 14:55:26 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src70 appears to have run properly
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Fri Jun 14 14:55:27 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src70 appears to have run properly
[Fri Jun 14 14:56:13 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 65 at 16.567444 pixels away
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:56 2013] XMMSAS src. selection expression = ellipse(39198.782928, 26373.093079, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_src.reg
[Fri Jun 14 21:35:56 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (414, 266) - (489, 341)
[Fri Jun 14 21:35:56 2013] XMMSAS bgd. selection expression = annulus(39198.782928, 26373.093079, 1087.500000, 2175.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65.gif
[Fri Jun 14 22:01:59 2013] Mean detx,y = (-11971.60, 255.36) 
[Fri Jun 14 22:02:00 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:02:09 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:02:09 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_src_b10.pi.gz
[Fri Jun 14 22:02:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_bgd.pi.gz
[Fri Jun 14 23:49:27 2013] Not generating rmf since there are only 95 counts
[Fri Jun 14 23:49:27 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:48 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:48 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_src_b10.pi.gz = 179.00
[Fri Jun 14 23:52:48 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_bgd.pi.gz = 893.00
[Fri Jun 14 23:52:48 2013] Got source and background scale factors 1140276.000000, 10763684.000000
[Fri Jun 14 23:52:48 2013] User source parameters:
  Position = (451.1, 303.7) = 5 41 2.99 -1 55 27.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 84.4 +/- 14.4
  Background aperture counts = 94.6
  Rate = 0.003 +/- 0.0004

[Fri Jun 14 23:52:48 2013] Updating counts from extracted products
[Fri Jun 14 23:52:48 2013] Set source signif. to 84.40/9.73 = 8.68
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00259, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 6e-14
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src65_pl.csv not found, spectral fit skipped or did not complete