[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (315.9, 310.3) = 5 41 42.22 -1 55 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 329.8 +/- 24.6
  Background counts = 24.8
  Rate = 0.01 +/- 0.0008

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 1.53'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Fri Jun 14 01:13:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 7.19"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Source 63 is offset by -5.711212 and -7.300049 pixels which is larger than
2 X fitted extent = 6.615448 x 6.615448, not incorporating fit results
[Fri Jun 14 05:18:53 2013] Source 63 is offset by -6.149925 and 1.609261 pixels which is larger than
2 X fitted extent = 0.893343 x 0.893343, not incorporating fit results
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:53 2013] Source is confused with source 24
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 7.19"
[Fri Jun 14 11:22:09 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 7.19"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 25 centroid is now closest to src. 64
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:54 2013] XMMSAS src. selection expression = ellipse(27435.168518, 26948.939728, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:54 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_src.reg
[Fri Jun 14 21:35:54 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (278, 273) - (353, 348)
[Fri Jun 14 21:35:54 2013] XMMSAS bgd. selection expression = annulus(27435.168518, 26948.939728, 1087.500000, 2175.000000, X, Y) && !ellipse(28683.912000, 29196.646000, 465.290413, 315.873609, 18.182000, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(26576.806000, 28137.096000, 371.720811, 304.221609, 138.513800, X, Y) && !ellipse(27712.619080, 28742.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(29907.608400, 28940.589600, 539.005616, 336.726410, 19.167900, X, Y) && !ellipse(26919.083923, 28650.747131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25630.271600, 25760.076400, 382.754411, 382.754411, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.020000, 28037.638000, 1199.040035, 1199.040035, 0.000000, X, Y) && !ellipse(26849.986000, 24972.268000, 1074.968031, 1074.968031, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(24965.766400, 29059.301600, 636.768818, 388.366411, 47.534900, X, Y) && !ellipse(29093.598053, 29713.406677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.775177, 26571.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29355.612274, 24344.982574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.400696, 28438.143005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.669000, 25302.344000, 377.796011, 144.176004, 32.800200, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(28605.863861, 26264.356354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.592400, 25775.636000, 1209.432035, 337.584010, 92.264860, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.935394, 24711.684601, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:54 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63.gif
[Fri Jun 14 21:45:04 2013] Mean detx,y = (-168.96, -262.04) 
[Fri Jun 14 21:45:05 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:45:15 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:45:15 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Fri Jun 14 21:45:15 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Fri Jun 14 23:10:48 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 23:10:48 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:41 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:41 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 1139.00
[Fri Jun 14 23:52:41 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_bgd.pi.gz = 299.00
[Fri Jun 14 23:52:41 2013] Got source and background scale factors 1173632.000000, 461784.000000
[Fri Jun 14 23:52:41 2013] User source parameters:
  Position = (315.9, 310.3) = 5 41 42.22 -1 55 4.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 379.1 +/- 34.8
  Background aperture counts = 759.9
  Rate = 0.01 +/- 0.001

[Fri Jun 14 23:52:41 2013] Updating counts from extracted products
[Fri Jun 14 23:52:41 2013] Set source signif. to 379.09/27.57 = 13.75
[Fri Jun 14 23:52:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:50 2013] Using photon index=1.80, rate=0.0116, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63.arf
[Fri Jun 14 23:52:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:50 2013] Updating source flux to 1.5e-13
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete