[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (233.9, 340.2) = 5 42 6.01 -1 52 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.1 +/- 10.7
  Background counts = 16.0
  Rate = 0.003 +/- 0.0005

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 5.57'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Jun 14 01:13:38 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.057
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 72 for pass 0, mean size = 9.21"
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Warning: source 72 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 11.259711 pixels away
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 9.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 9.21"
[Fri Jun 14 11:22:09 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.057
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 72 for pass 1, mean size = 9.21"
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72.csv
[Fri Jun 14 14:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Source 49 is offset by -8.552372 and 2.488679 pixels which is larger than
2 X fitted extent = 1.060336 x 1.060336, not incorporating fit results
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:56 2013] XMMSAS src. selection expression = ellipse(20301.833603, 29549.355072, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_src.reg
[Fri Jun 14 21:35:56 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (196, 303) - (271, 378)
[Fri Jun 14 21:35:56 2013] XMMSAS bgd. selection expression = annulus(20301.833603, 29549.355072, 1087.500000, 2175.000000, X, Y) && !ellipse(23076.292755, 28383.457367, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:56 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49.gif
[Fri Jun 14 22:02:25 2013] Mean detx,y = (7229.06, 1337.77) 
[Fri Jun 14 22:02:26 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 22:02:48 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 22:02:48 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Jun 14 22:02:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Jun 14 23:49:39 2013] Not generating rmf since there are only 59 counts
[Fri Jun 14 23:49:39 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:48 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:48 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_src_b10.pi.gz = 144.00
[Fri Jun 14 23:52:48 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_bgd.pi.gz = 833.00
[Fri Jun 14 23:52:48 2013] Got source and background scale factors 1097254.000000, 10279407.000000
[Fri Jun 14 23:52:48 2013] User source parameters:
  Position = (233.9, 340.2) = 5 42 6.01 -1 52 52.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 55.1 +/- 13.0
  Background aperture counts = 88.9
  Rate = 0.002 +/- 0.0004

[Fri Jun 14 23:52:48 2013] Updating counts from extracted products
[Fri Jun 14 23:52:48 2013] Set source signif. to 55.08/9.43 = 5.84
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00169, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 3.2e-14
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src49_pl.csv not found, spectral fit skipped or did not complete