[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (335.0, 342.1) = 5 41 36.69 -1 52 44.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.0 +/- 18.9
  Background counts = 24.7
  Rate = 0.006 +/- 0.0006

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 4.13'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Fri Jun 14 01:13:38 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.832
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 8.49"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Warning, spatial fit 42 centroid is now closest to src. 3
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Fri Jun 14 11:22:09 2013] source mask rpix=2.0, npix_max = 24, mask sum = 20, frac = 0.832
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 42 for pass 1, mean size = 8.49"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jun 14 14:55:25 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src42 appears to have run properly
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Source 48 is offset by -4.396160 and 6.728077 pixels which is larger than
2 X fitted extent = 0.920349 x 0.920349, not incorporating fit results
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 42 centroid is now closest to src. 4
[Fri Jun 14 14:56:14 2013] Source 48 is offset by -1.327356 and 7.984605 pixels which is larger than
2 X fitted extent = 0.963251 x 0.963251, not incorporating fit results
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(29093.598053, 29713.406677, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (297, 305) - (372, 380)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(29093.598053, 29713.406677, 1087.500000, 2175.000000, X, Y) && !ellipse(26516.371200, 30733.892840, 650.528019, 500.589614, 121.507360, X, Y) && !ellipse(28683.912000, 29196.646000, 465.290413, 315.873609, 18.182000, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(28356.997345, 30401.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.806000, 28137.096000, 371.720811, 304.221609, 138.513800, X, Y) && !ellipse(27712.619080, 28742.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(29907.608400, 28940.589600, 539.005616, 336.726410, 19.167900, X, Y) && !ellipse(26919.083923, 28650.747131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(30586.675420, 28255.042200, 398.000011, 398.000011, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.168518, 26948.939728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.020000, 28037.638000, 1199.040035, 1199.040035, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(30591.577080, 30050.856600, 616.173618, 421.600012, 72.098083, X, Y) && !ellipse(28008.997345, 30229.693054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31287.496600, 27673.020600, 373.168811, 373.168811, 0.000000, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(28580.585327, 32206.917267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48.gif
[Fri Jun 14 21:49:55 2013] Mean detx,y = (-1391.39, 2246.84) 
[Fri Jun 14 21:49:56 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:50:05 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:50:05 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Fri Jun 14 21:50:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Fri Jun 14 23:43:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 23:43:07 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:44 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:44 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 977.00
[Fri Jun 14 23:52:44 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 722.00
[Fri Jun 14 23:52:44 2013] Got source and background scale factors 1333580.000000, 3627780.000000
[Fri Jun 14 23:52:44 2013] User source parameters:
  Position = (335.0, 342.1) = 5 41 36.69 -1 52 44.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 711.6 +/- 32.3
  Background aperture counts = 265.4
  Rate = 0.02 +/- 0.001

[Fri Jun 14 23:52:44 2013] Updating counts from extracted products
[Fri Jun 14 23:52:44 2013] Set source signif. to 711.59/16.29 = 43.68
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.0218, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 3e-13
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete