[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (362.5, 379.6) = 5 41 28.70 -1 50 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.4 +/- 13.2
  Background counts = 19.7
  Rate = 0.005 +/- 0.0006

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 7.50'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 10.18"
[Fri Jun 14 01:13:38 2013] source mask rpix=2.3, npix_max = 32, mask sum = 25, frac = 0.775
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 10.18"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src55.ximg exists
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src55_1.ximg exists
[Fri Jun 14 05:18:00 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src55 appears to have run properly
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Fri Jun 14 05:18:02 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 237.008000, observed total counts = 224.000000
[Fri Jun 14 05:18:53 2013] Offset between fit and detection position for source 43 = 0.437347 pixels
[Fri Jun 14 05:18:53 2013] 236.894200 total counts/ 167.519000 bgd. counts: snr = 5.360092
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.437347 pixels
  Position = (362.1, 379.5) = 5 41 28.83 -1 50 2.3
  Extent = 5.5 (4.1-7.4)" x 3.8 (3.0-5.0)", rotation angle = 354 (314-77) degrees
  Source counts = 69.4 +/- 15.4
  Background counts = 167.5
  Rate = 0.002 +/- 0.0005
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.81
[Fri Jun 14 11:22:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 4.68"
[Fri Jun 14 11:22:09 2013] source mask rpix=1.1, npix_max = 9, mask sum = 12, frac = 1.206
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 55 for pass 1, mean size = 4.68"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55.csv
[Fri Jun 14 14:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 55 centroid is now closest to src. 19
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.81
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(31451.414440, 32967.497600, 332.011810, 230.155207, 353.915009, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (343, 360) - (381, 399)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(31451.414440, 32967.497600, 553.353016, 1106.706032, X, Y) && !ellipse(32874.224365, 33659.327148, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43.gif
[Fri Jun 14 21:53:36 2013] Mean detx,y = (-3528.72, 5990.99) 
[Fri Jun 14 21:53:37 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:53:55 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:53:55 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Fri Jun 14 21:53:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Fri Jun 14 23:44:30 2013] Not generating rmf since there are only 69 counts
[Fri Jun 14 23:44:30 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:46 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:46 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 90.00
[Fri Jun 14 23:52:46 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 234.00
[Fri Jun 14 23:52:46 2013] Got source and background scale factors 216136.000000, 2170774.000000
[Fri Jun 14 23:52:46 2013] User source parameters:
  Position = (362.1, 379.5) = 5 41 28.83 -1 50 2.3
  Extent = 5.5 (4.1-7.4)" x 3.8 (3.0-5.0)", rotation angle = 354 (314-77) degrees
  Source aperture counts = 66.7 +/- 10.5
  Background aperture counts = 23.3
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00213, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 4.8e-14
[Fri Jun 14 23:53:17 2013] Source 43 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete