[Thu Jun 13 19:26:30 2013] Detection parameters:
  Position = (330.3, 336.0) = 5 41 38.04 -1 53 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1503.7 +/- 47.2
  Background counts = 25.1
  Rate = 0.05 +/- 0.002

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 3.57'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Jun 14 01:13:38 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.21"
[Fri Jun 14 05:17:59 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 14 05:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 05:17:59 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 14 05:17:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3.csv
[Fri Jun 14 05:17:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Warning, spatial fit 3 centroid is now closest to src. 46
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Jun 14 11:22:09 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.21"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 3 centroid is now closest to src. 46
[Fri Jun 14 14:56:13 2013] Spatial fit model total counts = 1909.580000, observed total counts = 1910.000000
[Fri Jun 14 14:56:13 2013] Offset between fit and detection position for source 4 = 0.187988 pixels
[Fri Jun 14 14:56:13 2013] Warning, changing simple spatial fit ID from 3 to 42
[Fri Jun 14 14:56:13 2013] 1780.399000 total counts/ 974.348000 bgd. counts: snr = 25.822927
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.187988 pixels
  Position = (330.3, 336.2) = 5 41 38.06 -1 53 10.8
  Extent = 5.8 (5.3-6.4)" x 3.9 (3.6-4.4)", rotation angle = 18 (10-27) degrees
  Source counts = 806.1 +/- 42.2
  Background counts = 974.3
  Rate = 0.02 +/- 0.001
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.22
[Fri Jun 14 21:35:53 2013] XMMSAS src. selection expression = ellipse(28683.912000, 29196.646000, 348.967810, 236.905207, 18.182000, X, Y)
[Fri Jun 14 21:35:53 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 14 21:35:53 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (310, 316) - (350, 356)
[Fri Jun 14 21:35:53 2013] XMMSAS bgd. selection expression = annulus(28683.912000, 29196.646000, 581.613017, 1163.226033, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(28356.997345, 30401.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27712.619080, 28742.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(29907.608400, 28940.589600, 539.005616, 336.726410, 19.167900, X, Y) && !ellipse(26919.083923, 28650.747131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(28008.997345, 30229.693054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29093.598053, 29713.406677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:53 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 14 21:38:17 2013] Mean detx,y = (-1183.79, 1924.66) 
[Fri Jun 14 21:38:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:38:26 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:38:26 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 14 21:38:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 14 23:52:38 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:38 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1100.00
[Fri Jun 14 23:52:38 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 20.00
[Fri Jun 14 23:52:38 2013] Got source and background scale factors 260800.000000, 20800.000000
[Fri Jun 14 23:52:38 2013] User source parameters:
  Position = (330.3, 336.2) = 5 41 38.06 -1 53 10.8
  Extent = 5.8 (5.3-6.4)" x 3.9 (3.6-4.4)", rotation angle = 18 (10-27) degrees
  Source aperture counts = 849.2 +/- 34.2
  Background aperture counts = 250.8
  Rate = 0.03 +/- 0.001

[Fri Jun 14 23:52:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:50 2013] Using photon index=1.80, rate=0.0247, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4.arf
[Fri Jun 14 23:52:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:50 2013] Updating source flux to 4.3e-13
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete