[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (487.4, 231.8) = 5 40 52.46 -2 0 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.2 +/- 15.9
  Background counts = 14.7
  Rate = 0.005 +/- 0.0005

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 14.53'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 13.69"
[Fri Jun 14 01:13:38 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 13.69"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Warning, spatial fit 54 centroid is now closest to src. 86
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 13.69"
[Fri Jun 14 11:22:09 2013] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 13.69"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 14 14:55:27 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Fri Jun 14 14:55:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Fri Jun 14 14:55:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Spatial fit model total counts = 354.245000, observed total counts = 308.000000
[Fri Jun 14 14:56:13 2013] Poor agreement between spatial fit and data for source 31
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 14:56:13 2013] Source 31 is offset by 3.377994 and 1.773449 pixels which is larger than
2 X fitted extent = 1.500547 x 1.500547, not incorporating fit results
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(42353.767517, 20115.408066, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (450, 194) - (525, 269)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(42353.767517, 20115.408066, 1087.500000, 2175.000000, X, Y) && !ellipse(39544.183655, 22237.080475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41020.698547, 20942.170914, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31.gif
[Fri Jun 14 21:53:16 2013] Mean detx,y = (-15720.85, -5600.96) 
[Fri Jun 14 21:53:17 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:53:33 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:53:33 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Jun 14 21:53:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Jun 14 23:44:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 23:44:19 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:46 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:46 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 209.00
[Fri Jun 14 23:52:46 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_bgd.pi.gz = 297.00
[Fri Jun 14 23:52:46 2013] Got source and background scale factors 1167488.000000, 3014906.000000
[Fri Jun 14 23:52:46 2013] User source parameters:
  Position = (487.4, 231.8) = 5 40 52.46 -2 0 45.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 94.0 +/- 15.5
  Background aperture counts = 115.0
  Rate = 0.003 +/- 0.0005

[Fri Jun 14 23:52:46 2013] Updating counts from extracted products
[Fri Jun 14 23:52:46 2013] Set source signif. to 93.99/10.72 = 8.76
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.00288, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 9.3e-14
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete