[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (509.0, 304.4) = 5 40 46.20 -1 55 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.3 +/- 17.4
  Background counts = 15.1
  Rate = 0.005 +/- 0.0005

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 15.27'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 14.06"
[Fri Jun 14 01:13:38 2013] source mask rpix=3.2, npix_max = 55, mask sum = 35, frac = 0.628
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 47 for pass 0, mean size = 14.06"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri Jun 14 05:18:02 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Fri Jun 14 05:18:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Fri Jun 14 05:18:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Source 26 is offset by -6.897338 and -3.161099 pixels which is larger than
2 X fitted extent = 2.159591 x 2.132349, not incorporating fit results
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 14.06 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 14.06"
[Fri Jun 14 11:22:09 2013] source mask rpix=3.2, npix_max = 55, mask sum = 35, frac = 0.628
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 14.06"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Source 26 is offset by 6.987788 and -0.625444 pixels which is larger than
2 X fitted extent = 1.650120 x 1.650120, not incorporating fit results
[Fri Jun 14 14:56:13 2013] Source 26 is offset by -7.638051 and -3.134203 pixels which is larger than
2 X fitted extent = 2.448083 x 2.247683, not incorporating fit results
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:55 2013] XMMSAS src. selection expression = ellipse(44231.093597, 26433.946350, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_src.reg
[Fri Jun 14 21:35:55 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (471, 267) - (546, 342)
[Fri Jun 14 21:35:55 2013] XMMSAS bgd. selection expression = annulus(44231.093597, 26433.946350, 1087.500000, 2175.000000, X, Y) && !ellipse(44126.283661, 24932.081238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44191.918640, 25348.987213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43929.986725, 23562.232147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44290.199860, 27176.040314, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:55 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26.gif
[Fri Jun 14 21:51:22 2013] Mean detx,y = (-16858.95, 720.32) 
[Fri Jun 14 21:51:23 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:51:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:51:36 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri Jun 14 21:51:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri Jun 14 23:43:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 23:43:36 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:45 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:45 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 440.00
[Fri Jun 14 23:52:45 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 450.00
[Fri Jun 14 23:52:45 2013] Got source and background scale factors 629972.000000, 3705889.000000
[Fri Jun 14 23:52:45 2013] User source parameters:
  Position = (509.0, 304.4) = 5 40 46.20 -1 55 32.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 363.5 +/- 22.0
  Background aperture counts = 76.5
  Rate = 0.01 +/- 0.0007

[Fri Jun 14 23:52:45 2013] Updating counts from extracted products
[Fri Jun 14 23:52:45 2013] Set source signif. to 363.50/8.75 = 41.56
[Fri Jun 14 23:52:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:51 2013] Using photon index=1.80, rate=0.0111, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26.arf
[Fri Jun 14 23:52:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:51 2013] Updating source flux to 6.2e-13
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete