[Thu Jun 13 19:26:31 2013] Detection parameters: Position = (315.1, 315.1) = 5 41 42.47 -1 54 42.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 548.2 +/- 30.7 Background counts = 25.3 Rate = 0.02 +/- 0.001 [Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 1.70' [Fri Jun 14 01:13:38 2013] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 7.28" [Fri Jun 14 01:13:38 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847 [Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 7.28" [Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src18.ximg exists [Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src18_1.ximg exists [Fri Jun 14 05:18:00 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src18 appears to have run properly [Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18.csv [Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18.csv [Fri Jun 14 05:18:01 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 1863.400000, observed total counts = 1811.000000 [Fri Jun 14 05:18:53 2013] Offset between fit and detection position for source 24 = 1.910832 pixels [Fri Jun 14 05:18:53 2013] 1774.794000 total counts/ 1165.990000 bgd. counts: snr = 17.829127 Spatial fit parameters: Offset between fit and detection position for source 24 = 1.910832 pixels Position = (315.9, 313.4) = 5 41 42.21 -1 54 50.0 Extent = 14.6 (13.9-29.1)" x 9.0 (7.4-10.5)", rotation angle = 85 (77-95) degrees Source counts = 608.8 +/- 42.1 Background counts = 1166.0 Rate = 0.02 +/- 0.001 [Fri Jun 14 05:18:53 2013] Source 24 is offset by 1.616559 and 0.044046 pixels which is larger than 2 X fitted extent = 1.411283 x 6.317150, not incorporating fit results [Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 05:18:53 2013] Assessing source extent using major axis lower bound [Fri Jun 14 05:18:53 2013] Source does appear to be extended [Fri Jun 14 05:18:53 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.32 [Fri Jun 14 05:18:53 2013] Source is confused with source 63 [Fri Jun 14 11:22:09 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 11.76" [Fri Jun 14 11:22:09 2013] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023 [Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 11.76" [Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src18.ximg exists [Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src18_1.ximg exists [Fri Jun 14 14:55:25 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src18 appears to have run properly [Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists [Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists [Fri Jun 14 14:55:26 2013] Fit fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly [Fri Jun 14 14:56:13 2013] Warning, spatial fit 18 centroid is now closest to src. 66 [Fri Jun 14 14:56:13 2013] Spatial fit model total counts = 975.178000, observed total counts = 974.000000 [Fri Jun 14 14:56:13 2013] Offset between fit and detection position for source 24 = 1.617159 pixels [Fri Jun 14 14:56:13 2013] Warning, changing simple spatial fit ID from 18 to 44 [Fri Jun 14 14:56:13 2013] 977.419000 total counts/ 839.359000 bgd. counts: snr = 4.765341 Spatial fit parameters: Offset between fit and detection position for source 24 = 1.617159 pixels Position = (314.3, 313.3) = 5 41 42.68 -1 54 50.2 Extent = 13.5 (13.1-13.7)" x 3.5 (2.7-4.8)", rotation angle = 90 Source counts = 138.1 +/- 31.3 Background counts = 839.4 Rate = 0.004 +/- 0.001 [Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000 [Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jun 14 14:56:14 2013] Assessing source extent using major axis lower bound [Fri Jun 14 14:56:14 2013] Source does appear to be extended [Fri Jun 14 14:56:14 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.76 [Fri Jun 14 14:56:14 2013] Source is asymmetric [Fri Jun 14 21:35:54 2013] XMMSAS src. selection expression = ellipse(27297.090000, 27210.090000, 811.950023, 212.932206, 90.000000, X, Y) [Fri Jun 14 21:35:54 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_src.reg [Fri Jun 14 21:35:54 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (268, 267) - (361, 360) [Fri Jun 14 21:35:54 2013] XMMSAS bgd. selection expression = annulus(27297.090000, 27210.090000, 1353.250039, 2706.500078, X, Y) && !ellipse(28683.912000, 29196.646000, 465.290413, 315.873609, 18.182000, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(28356.997345, 30401.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.806000, 28137.096000, 371.720811, 304.221609, 138.513800, X, Y) && !ellipse(27712.619080, 28742.605835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(29907.608400, 28940.589600, 539.005616, 336.726410, 19.167900, X, Y) && !ellipse(26919.083923, 28650.747131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25630.271600, 25760.076400, 382.754411, 382.754411, 0.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.168518, 26948.939728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.020000, 28037.638000, 1199.040035, 1199.040035, 0.000000, X, Y) && !ellipse(26849.986000, 24972.268000, 1074.968031, 1074.968031, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(30591.577080, 30050.856600, 616.173618, 421.600012, 72.098083, X, Y) && !ellipse(24965.766400, 29059.301600, 636.768818, 388.366411, 47.534900, X, Y) && !ellipse(28008.997345, 30229.693054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29093.598053, 29713.406677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.775177, 26571.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29355.612274, 24344.982574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24214.559570, 25094.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.400696, 28438.143005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.089081, 23800.852905, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26298.669000, 25302.344000, 377.796011, 144.176004, 32.800200, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(23960.406891, 26674.561035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28605.863861, 26264.356354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.592400, 25775.636000, 1209.432035, 337.584010, 92.264860, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26239.935394, 24711.684601, 870.000000, 870.000000, 0.000000, X, Y) [Fri Jun 14 21:35:54 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24.gif [Fri Jun 14 21:43:38 2013] Mean detx,y = (-57.62, -135.73) [Fri Jun 14 21:43:38 2013] Setting backscal keywords in source and bgd. spectrum [Fri Jun 14 21:43:47 2013] Binned source spectrum to 10 counts/bin [Fri Jun 14 21:43:48 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_src_b10.pi.gz [Fri Jun 14 21:43:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_bgd.pi.gz [Fri Jun 14 23:52:40 2013] Updating aperture counts using extracted products [Fri Jun 14 23:52:40 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 635.00 [Fri Jun 14 23:52:40 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 419.00 [Fri Jun 14 23:52:40 2013] Got source and background scale factors 536928.000000, 1510672.000000 [Fri Jun 14 23:52:40 2013] User source parameters: Position = (314.3, 313.3) = 5 41 42.68 -1 54 50.2 Extent = 13.5 (13.1-13.7)" x 3.5 (2.7-4.8)", rotation angle = 90 Source aperture counts = 486.1 +/- 26.2 Background aperture counts = 148.9 Rate = 0.01 +/- 0.0008 [Fri Jun 14 23:52:50 2013] Calculating source flux in energy range 0.30-8.00 [Fri Jun 14 23:52:50 2013] Using photon index=1.80, rate=0.00423, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24.arf [Fri Jun 14 23:52:50 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri Jun 14 23:52:50 2013] Updating source flux to 6.7e-14 [Fri Jun 14 23:53:17 2013] Flag b found in src. 24 procflags, skipping spectral fitting [Fri Jun 14 23:53:17 2013] Flag c found in src. 24 procflags, skipping spectral fitting [Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete