[Thu Jun 13 19:26:31 2013] Detection parameters:
  Position = (319.1, 330.9) = 5 41 41.30 -1 53 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 656.5 +/- 31.5
  Background counts = 25.3
  Rate = 0.02 +/- 0.001

[Thu Jun 13 19:26:32 2013] Off-axis axis estimate = 2.79'
[Fri Jun 14 01:13:38 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 01:13:38 2013] Initial guess for spatial extent in simple fitting = 7.82"
[Fri Jun 14 01:13:38 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Fri Jun 14 01:13:38 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.82"
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 14 05:18:00 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun 14 05:18:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12.csv
[Fri Jun 14 05:18:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun 14 05:18:01 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun 14 05:18:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun 14 05:18:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:53 2013] Spatial fit model total counts = 1818.110000, observed total counts = 1641.000000
[Fri Jun 14 05:18:53 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun 14 05:18:53 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:53 2013] Assessing source extent using major
[Fri Jun 14 05:18:53 2013] Source does appear to be extended
[Fri Jun 14 05:18:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 11:22:09 2013] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 11:22:09 2013] Initial guess for spatial extent in simple fitting = 7.82"
[Fri Jun 14 11:22:09 2013] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.757
[Fri Jun 14 11:22:09 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.82"
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 14 14:55:25 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 14 14:55:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12.csv
[Fri Jun 14 14:55:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 14 14:55:26 2013] fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 14 14:55:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jun 14 14:55:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:56:13 2013] Warning, spatial fit 12 centroid is now closest to src. 5
[Fri Jun 14 14:56:14 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:56:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:56:14 2013] Assessing source extent using major
[Fri Jun 14 14:56:14 2013] Source does appear to be extended
[Fri Jun 14 14:56:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 21:35:54 2013] XMMSAS src. selection expression = ellipse(27712.619080, 28742.605835, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 21:35:54 2013] Writing source region out to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_src.reg
[Fri Jun 14 21:35:54 2013] Extracting stamp from image fullrun_mos2_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (282, 293) - (357, 368)
[Fri Jun 14 21:35:54 2013] XMMSAS bgd. selection expression = annulus(27712.619080, 28742.605835, 1087.500000, 2175.000000, X, Y) && !ellipse(26516.371200, 30733.892840, 650.528019, 500.589614, 121.507360, X, Y) && !ellipse(28683.912000, 29196.646000, 465.290413, 315.873609, 18.182000, X, Y) && !ellipse(28838.164000, 28340.776000, 838.056024, 292.502408, 15.442600, X, Y) && !ellipse(28356.997345, 30401.792053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.806000, 28137.096000, 371.720811, 304.221609, 138.513800, X, Y) && !ellipse(28763.509240, 27591.094200, 454.000813, 293.310408, 288.933700, X, Y) && !ellipse(29907.608400, 28940.589600, 539.005616, 336.726410, 19.167900, X, Y) && !ellipse(26919.083923, 28650.747131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.090000, 27210.090000, 1082.600031, 283.909608, 90.000000, X, Y) && !ellipse(30118.978000, 27111.330000, 1303.496038, 1303.496038, 0.000000, X, Y) && !ellipse(29245.094025, 27716.564453, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.168518, 26948.939728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26042.020000, 28037.638000, 1199.040035, 1199.040035, 0.000000, X, Y) && !ellipse(29814.368000, 27311.808000, 1280.936037, 1129.376032, 156.046000, X, Y) && !ellipse(24965.766400, 29059.301600, 636.768818, 388.366411, 47.534900, X, Y) && !ellipse(28008.997345, 30229.693054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29093.598053, 29713.406677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26746.775177, 26571.835297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25497.400696, 28438.143005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26047.896000, 27026.042000, 1632.576047, 1632.576047, 0.000000, X, Y) && !ellipse(28605.863861, 26264.356354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28510.592400, 25775.636000, 1209.432035, 337.584010, 92.264860, X, Y) && !ellipse(29928.859650, 28330.739105, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 21:35:54 2013] Writing fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22.gif
[Fri Jun 14 21:42:23 2013] Mean detx,y = (-304.42, 1364.22) 
[Fri Jun 14 21:42:24 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 21:42:34 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 21:42:34 2013] Setting source spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Fri Jun 14 21:42:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Fri Jun 14 22:38:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jun 14 22:38:09 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:39 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:39 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1175.00
[Fri Jun 14 23:52:40 2013] Total counts from fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 364.00
[Fri Jun 14 23:52:40 2013] Got source and background scale factors 1143812.000000, 1492492.000000
[Fri Jun 14 23:52:40 2013] User source parameters:
  Position = (319.1, 330.9) = 5 41 41.30 -1 53 33.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 896.0 +/- 35.3
  Background aperture counts = 279.0
  Rate = 0.03 +/- 0.001

[Fri Jun 14 23:52:40 2013] Updating counts from extracted products
[Fri Jun 14 23:52:40 2013] Set source signif. to 896.04/16.70 = 53.65
[Fri Jun 14 23:52:50 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:50 2013] Using photon index=1.80, rate=0.0275, arf fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22.arf
[Fri Jun 14 23:52:50 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:50 2013] Updating source flux to 3.5e-13
[Fri Jun 14 23:53:17 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:34 2013] xmm0112640101/analysis//spectral/fullrun_mos2_xmm0112640101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete