[Thu Jun 13 19:25:50 2013] Detection parameters:
  Position = (276.0, 307.3) = 5 41 53.79 -1 55 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.9 +/- 13.1
  Background counts = 21.0
  Rate = 0.002 +/- 0.0005

[Thu Jun 13 19:25:50 2013] Off-axis axis estimate = 1.75'
[Thu Jun 13 22:01:22 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:01:22 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Thu Jun 13 22:01:22 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Thu Jun 13 22:01:22 2013] Giving source the simple spatial ID 75 for pass 0, mean size = 7.30"
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75.ximg exists
[Fri Jun 14 01:13:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75.csv
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75_1.ximg exists
[Fri Jun 14 01:13:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75.csv
[Fri Jun 14 01:13:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75.csv
[Fri Jun 14 01:13:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:37 2013] Source 61 is offset by -6.691939 and 6.013350 pixels which is larger than
2 X fitted extent = 0.839343 x 0.839343, not incorporating fit results
[Fri Jun 14 05:18:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:37 2013] Assessing source extent using major
[Fri Jun 14 05:18:37 2013] Source does appear to be extended
[Fri Jun 14 05:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 05:18:37 2013] Source is confused with source 26
[Fri Jun 14 08:29:51 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 08:29:51 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jun 14 08:29:51 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jun 14 08:29:51 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 7.30"
[Fri Jun 14 11:22:08 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src69.ximg exists
[Fri Jun 14 11:22:08 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src69_1.ximg exists
[Fri Jun 14 11:22:08 2013] Fit fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src69 appears to have run properly
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Fri Jun 14 11:22:09 2013] Fit fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src69 appears to have run properly
[Fri Jun 14 14:55:58 2013] Spatial fit model total counts = 1069.670000, observed total counts = 1067.000000
[Fri Jun 14 14:55:58 2013] Offset between fit and detection position for source 61 = 7.097354 pixels
[Fri Jun 14 14:55:58 2013] 583.588000 total counts/ 454.383000 bgd. counts: snr = 6.061335
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 7.097354 pixels
  Position = (282.7, 304.9) = 5 41 51.85 -1 55 26.7
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source counts = 129.2 +/- 24.2
  Background counts = 454.4
  Rate = 0.004 +/- 0.0008
[Fri Jun 14 14:55:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:58 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:55:58 2013] Source does appear to be extended
[Fri Jun 14 14:55:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 19:15:52 2013] XMMSAS src. selection expression = ellipse(24546.884000, 26478.532000, 876.276025, 876.276025, 0.000000, X, Y)
[Fri Jun 14 19:15:52 2013] Writing source region out to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_src.reg
[Fri Jun 14 19:15:52 2013] Extracting stamp from image fullrun_mos1_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (232, 255) - (333, 355)
[Fri Jun 14 19:15:52 2013] XMMSAS bgd. selection expression = annulus(24546.884000, 26478.532000, 1460.460042, 2920.920084, X, Y) && !ellipse(26579.842000, 28137.002000, 463.045613, 341.537610, 348.992600, X, Y) && !ellipse(23383.974200, 26833.824800, 387.332011, 387.332011, 0.000000, X, Y) && !ellipse(27703.870152, 28749.513800, 321.354409, 241.693607, 10.338400, X, Y) && !ellipse(26885.908000, 28628.792000, 418.102412, 322.768009, 29.407900, X, Y) && !ellipse(27545.500000, 27350.455600, 1404.656040, 981.712028, 91.438270, X, Y) && !ellipse(25628.554140, 25769.452800, 413.391212, 413.391212, 0.000000, X, Y) && !ellipse(27307.496000, 27407.022000, 1947.288056, 317.420809, 76.380500, X, Y) && !ellipse(23065.160200, 28390.330500, 358.503210, 358.503210, 0.000000, X, Y) && !ellipse(26298.649000, 27576.226000, 1121.432032, 585.178417, 109.672200, X, Y) && !ellipse(23105.572860, 25950.711400, 380.064011, 266.688808, 310.692000, X, Y) && !ellipse(24931.290000, 29085.710000, 1196.424034, 348.560810, 226.465000, X, Y) && !ellipse(26821.676000, 25066.596000, 1073.280031, 1073.280031, 0.000000, X, Y) && !ellipse(26782.160000, 26530.514000, 354.456010, 354.456010, 0.000000, X, Y) && !ellipse(25548.202026, 28406.298584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26769.556000, 23807.392000, 298.567209, 298.567209, 0.000000, X, Y) && !ellipse(21598.156967, 25254.441620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26757.852000, 26694.432000, 1064.704031, 1064.704031, 0.000000, X, Y) && !ellipse(26280.541412, 25352.956482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28380.330400, 25371.696000, 1198.200034, 283.444008, 107.712800, X, Y) && !ellipse(26604.385956, 24298.769135, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 19:15:52 2013] Writing fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61.gif
[Fri Jun 14 19:40:19 2013] Mean detx,y = (-949.96, -2927.05) 
[Fri Jun 14 19:40:20 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 19:40:30 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 19:40:30 2013] Setting source spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Jun 14 19:40:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Jun 14 23:52:35 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:35 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 405.00
[Fri Jun 14 23:52:35 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 1208.00
[Fri Jun 14 23:52:36 2013] Got source and background scale factors 2404800.000000, 10234772.000000
[Fri Jun 14 23:52:36 2013] User source parameters:
  Position = (282.7, 304.9) = 5 41 51.85 -1 55 26.7
  Extent = 14.6 (14.5-29.2)", rotation angle = 0
  Source aperture counts = 121.2 +/- 21.1
  Background aperture counts = 283.8
  Rate = 0.004 +/- 0.0007

[Fri Jun 14 23:52:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:38 2013] Using photon index=1.80, rate=0.00401, arf fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61.arf
[Fri Jun 14 23:52:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:38 2013] Updating source flux to 4.7e-14
[Fri Jun 14 23:52:54 2013] Flag b found in src. 61 procflags, skipping spectral fitting
[Fri Jun 14 23:52:54 2013] Flag c found in src. 61 procflags, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] xmm0112640101/analysis//spectral/fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete