[Thu Jun 13 19:25:50 2013] Detection parameters:
  Position = (332.8, 381.4) = 5 41 37.32 -1 49 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 13.5
  Background counts = 21.6
  Rate = 0.004 +/- 0.0005

[Thu Jun 13 19:25:50 2013] Off-axis axis estimate = 6.51'
[Thu Jun 13 22:01:22 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:01:22 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Thu Jun 13 22:01:22 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Thu Jun 13 22:01:22 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 9.68"
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60.ximg exists
[Fri Jun 14 01:13:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60.csv
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri Jun 14 01:13:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60.csv
[Fri Jun 14 01:13:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Fri Jun 14 01:13:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:37 2013] Warning: source 60 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 12.857672 pixels away
[Fri Jun 14 05:18:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:37 2013] Assessing source extent using major
[Fri Jun 14 05:18:37 2013] Source does appear to be extended
[Fri Jun 14 05:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 08:29:51 2013] Using EEF radius (= 9.68 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 08:29:51 2013] Initial guess for spatial extent in simple fitting = 9.68"
[Fri Jun 14 08:29:51 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.009
[Fri Jun 14 08:29:51 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 9.68"
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56.ximg exists
[Fri Jun 14 11:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56.csv
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56_1.ximg exists
[Fri Jun 14 11:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56.csv
[Fri Jun 14 11:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Fri Jun 14 11:22:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Fri Jun 14 11:22:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56.csv
[Fri Jun 14 11:22:09 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:58 2013] Warning: source 56 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 13.160452 pixels away
[Fri Jun 14 14:55:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:58 2013] Assessing source extent using major
[Fri Jun 14 14:55:58 2013] Source does appear to be extended
[Fri Jun 14 14:55:58 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 19:15:52 2013] XMMSAS src. selection expression = ellipse(28903.259003, 33135.296051, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jun 14 19:15:52 2013] Writing source region out to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_src.reg
[Fri Jun 14 19:15:52 2013] Extracting stamp from image fullrun_mos1_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (295, 344) - (370, 419)
[Fri Jun 14 19:15:52 2013] XMMSAS bgd. selection expression = annulus(28903.259003, 33135.296051, 1087.500000, 2175.000000, X, Y) && !ellipse(30127.025120, 35199.283200, 743.212821, 495.151214, 9.004099, X, Y) && !ellipse(26515.273600, 30729.690540, 642.943219, 464.873613, 114.713269, X, Y) && !ellipse(27372.581512, 35367.424316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28915.975800, 35187.265000, 595.228017, 595.228017, 0.000000, X, Y) && !ellipse(31436.344920, 32967.929600, 364.924811, 220.139206, 18.996500, X, Y) && !ellipse(28626.647430, 32243.195587, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 19:15:52 2013] Writing fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47.gif
[Fri Jun 14 19:36:35 2013] Mean detx,y = (6017.83, 842.03) 
[Fri Jun 14 19:36:36 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 19:36:53 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 19:36:53 2013] Setting source spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Fri Jun 14 19:36:53 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Fri Jun 14 21:23:42 2013] Not generating rmf since there are only 97 counts
[Fri Jun 14 21:23:42 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:33 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:33 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 201.00
[Fri Jun 14 23:52:33 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_bgd.pi.gz = 833.00
[Fri Jun 14 23:52:33 2013] Got source and background scale factors 1258582.000000, 8153980.000000
[Fri Jun 14 23:52:33 2013] User source parameters:
  Position = (332.8, 381.4) = 5 41 37.32 -1 49 52.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 72.4 +/- 15.2
  Background aperture counts = 128.6
  Rate = 0.002 +/- 0.0005

[Fri Jun 14 23:52:33 2013] Updating counts from extracted products
[Fri Jun 14 23:52:33 2013] Set source signif. to 72.42/11.34 = 6.39
[Fri Jun 14 23:52:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:37 2013] Using photon index=1.80, rate=0.00225, arf fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47.arf
[Fri Jun 14 23:52:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:37 2013] Updating source flux to 3.3e-14
[Fri Jun 14 23:52:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jun 14 23:53:17 2013] xmm0112640101/analysis//spectral/fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete