[Thu Jun 13 19:25:49 2013] Detection parameters:
  Position = (507.0, 286.9) = 5 40 46.78 -1 56 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 498.5 +/- 30.4
  Background counts = 14.1
  Rate = 0.02 +/- 0.0009

[Thu Jun 13 19:25:50 2013] Off-axis axis estimate = 15.14'
[Thu Jun 13 22:01:22 2013] Using EEF radius (= 14.00 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:01:22 2013] Initial guess for spatial extent in simple fitting = 14.00"
[Thu Jun 13 22:01:22 2013] source mask rpix=3.2, npix_max = 55, mask sum = 52, frac = 0.940
[Thu Jun 13 22:01:22 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 14.00"
[Fri Jun 14 01:13:35 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Jun 14 01:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 14 01:13:35 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Jun 14 01:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23.csv
[Fri Jun 14 01:13:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:13:37 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Jun 14 01:13:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 14 01:13:37 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Jun 14 01:13:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Fri Jun 14 01:13:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:36 2013] Warning, spatial fit 23 centroid is now closest to src. 3
[Fri Jun 14 05:18:37 2013] Spatial fit model total counts = 699.480000, observed total counts = 648.000000
[Fri Jun 14 05:18:37 2013] Offset between fit and detection position for source 4 = 1.170126 pixels
[Fri Jun 14 05:18:37 2013] Warning, changing simple spatial fit ID from 23 to 84
[Fri Jun 14 05:18:37 2013] 696.375000 total counts/ 344.760000 bgd. counts: snr = 18.936903
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 1.170126 pixels
  Position = (507.5, 285.9) = 5 40 46.62 -1 56 49.4
  Extent = 23.3 (15.3-27.5)" x 10.0 (8.2-12.3)", rotation angle = 121 (112-126) degrees
  Source counts = 351.6 +/- 26.4
  Background counts = 344.8
  Rate = 0.01 +/- 0.0008
[Fri Jun 14 05:18:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:37 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:18:37 2013] Source does appear to be extended
[Fri Jun 14 05:18:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Fri Jun 14 05:18:37 2013] Source is confused with source 3
[Fri Jun 14 08:29:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 08:29:51 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 14 08:29:51 2013] Initial guess for spatial extent in simple fitting = 16.67"
[Fri Jun 14 08:29:51 2013] source mask rpix=3.8, npix_max = 75, mask sum = 51, frac = 0.679
[Fri Jun 14 08:29:51 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 16.67"
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23.ximg exists
[Fri Jun 14 11:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23.csv
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23_1.ximg exists
[Fri Jun 14 11:22:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23.csv
[Fri Jun 14 11:22:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 11:22:08 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Fri Jun 14 11:22:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 14 11:22:08 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Fri Jun 14 11:22:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Fri Jun 14 11:22:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 14:55:58 2013] Warning, spatial fit 23 centroid is now closest to src. 75
[Fri Jun 14 14:55:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:58 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:55:58 2013] Source does appear to be extended
[Fri Jun 14 14:55:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25
[Fri Jun 14 19:15:51 2013] XMMSAS src. selection expression = ellipse(44106.678000, 24823.654000, 1398.702040, 601.560017, 121.257900, X, Y)
[Fri Jun 14 19:15:51 2013] Writing source region out to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 14 19:15:51 2013] Extracting stamp from image fullrun_mos1_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (427, 206) - (588, 366)
[Fri Jun 14 19:15:51 2013] XMMSAS bgd. selection expression = annulus(44106.678000, 24823.654000, 2331.170067, 4662.340134, X, Y) && !ellipse(39550.627411, 22243.747253, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(44163.408936, 25386.715179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42354.112680, 20066.216400, 764.989622, 346.525610, 293.732300, X, Y) && !ellipse(39171.746765, 26499.273346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43407.997345, 23903.129944, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun 14 19:15:51 2013] Writing fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4.gif
[Fri Jun 14 19:28:04 2013] Mean detx,y = (-373.92, 16689.36) 
[Fri Jun 14 19:28:05 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 19:28:36 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 19:28:36 2013] Setting source spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 14 19:28:36 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 14 23:52:28 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:28 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 1322.00
[Fri Jun 14 23:52:28 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1620.00
[Fri Jun 14 23:52:29 2013] Got source and background scale factors 955318.000000, 18672508.000000
[Fri Jun 14 23:52:29 2013] User source parameters:
  Position = (507.5, 285.9) = 5 40 46.62 -1 56 49.4
  Extent = 23.3 (15.3-27.5)" x 10.0 (8.2-12.3)", rotation angle = 121 (112-126) degrees
  Source aperture counts = 1239.1 +/- 37.4
  Background aperture counts = 82.9
  Rate = 0.04 +/- 0.001

[Fri Jun 14 23:52:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:37 2013] Using photon index=1.80, rate=0.0109, arf fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4.arf
[Fri Jun 14 23:52:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:37 2013] Updating source flux to 5.7e-13
[Fri Jun 14 23:52:54 2013] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] xmm0112640101/analysis//spectral/fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete