[Thu Jun 13 19:25:49 2013] Detection parameters:
  Position = (271.8, 234.2) = 5 41 55.03 -2 0 35.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 127.4 +/- 22.5
  Background counts = 12.0
  Rate = 0.004 +/- 0.0007

[Thu Jun 13 19:25:50 2013] Off-axis axis estimate = 5.05'
[Thu Jun 13 22:01:22 2013] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:01:22 2013] Initial guess for spatial extent in simple fitting = 8.95"
[Thu Jun 13 22:01:22 2013] source mask rpix=2.1, npix_max = 26, mask sum = 14, frac = 0.535
[Thu Jun 13 22:01:22 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 8.95"
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src58.ximg exists
[Fri Jun 14 01:13:36 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Jun 14 01:13:36 2013] Fit fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src58 appears to have run properly
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Fri Jun 14 01:13:38 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Jun 14 01:13:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Fri Jun 14 01:13:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:37 2013] Spatial fit model total counts = 237.150000, observed total counts = 217.000000
[Fri Jun 14 05:18:37 2013] Offset between fit and detection position for source 33 = 0.427863 pixels
[Fri Jun 14 05:18:37 2013] 234.911100 total counts/ 165.581000 bgd. counts: snr = 5.387863
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.427863 pixels
  Position = (272.2, 234.2) = 5 41 54.91 -2 0 34.5
  Extent = 9.2 (6.6-13.1)" x 4.9 (2.7-8.2)", rotation angle = 358 (22-222) degrees
  Source counts = 69.3 +/- 15.3
  Background counts = 165.6
  Rate = 0.002 +/- 0.0005
[Fri Jun 14 05:18:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:37 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 05:18:37 2013] Source does appear to be extended
[Fri Jun 14 05:18:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Fri Jun 14 08:29:51 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 14 08:29:51 2013] Initial guess for spatial extent in simple fitting = 7.03"
[Fri Jun 14 08:29:51 2013] source mask rpix=1.6, npix_max = 17, mask sum = 7, frac = 0.391
[Fri Jun 14 08:29:51 2013] Skipping simple spatial due to low active detector fraction
[Fri Jun 14 14:55:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:58 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:55:58 2013] Source does appear to be extended
[Fri Jun 14 14:55:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.80
[Fri Jun 14 19:15:52 2013] XMMSAS src. selection expression = ellipse(23632.096600, 20323.569000, 550.276216, 293.243408, 357.908140, X, Y)
[Fri Jun 14 19:15:52 2013] Writing source region out to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_src.reg
[Fri Jun 14 19:15:52 2013] Extracting stamp from image fullrun_mos1_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (241, 203) - (304, 266)
[Fri Jun 14 19:15:52 2013] XMMSAS bgd. selection expression = annulus(23632.096600, 20323.569000, 917.127026, 1834.254053, X, Y) && !ellipse(24376.033600, 19376.004000, 499.321614, 499.321614, 0.000000, X, Y)
[Fri Jun 14 19:15:52 2013] Writing fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33.gif
[Fri Jun 14 19:35:58 2013] Mean detx,y = (-7226.78, -3043.20) 
[Fri Jun 14 19:35:59 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 19:36:15 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 19:36:15 2013] Setting source spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Fri Jun 14 19:36:15 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Fri Jun 14 21:23:36 2013] Not generating rmf since there are only 69 counts
[Fri Jun 14 21:23:36 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:33 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:33 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 93.00
[Fri Jun 14 23:52:33 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_bgd.pi.gz = 550.00
[Fri Jun 14 23:52:33 2013] Got source and background scale factors 388916.000000, 6842842.000000
[Fri Jun 14 23:52:33 2013] User source parameters:
  Position = (272.2, 234.2) = 5 41 54.91 -2 0 34.5
  Extent = 9.2 (6.6-13.1)" x 4.9 (2.7-8.2)", rotation angle = 358 (22-222) degrees
  Source aperture counts = 61.7 +/- 10.7
  Background aperture counts = 31.3
  Rate = 0.002 +/- 0.0003

[Fri Jun 14 23:52:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:37 2013] Using photon index=1.80, rate=0.00215, arf fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33.arf
[Fri Jun 14 23:52:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:37 2013] Updating source flux to 7.1e-14
[Fri Jun 14 23:52:54 2013] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] xmm0112640101/analysis//spectral/fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete