[Thu Jun 13 19:25:49 2013] Detection parameters:
  Position = (475.5, 415.3) = 5 40 55.92 -1 47 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.8 +/- 15.6
  Background counts = 12.7
  Rate = 0.004 +/- 0.0005

[Thu Jun 13 19:25:50 2013] Off-axis axis estimate = 15.38'
[Thu Jun 13 22:01:22 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 22:01:22 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 22:01:22 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Thu Jun 13 22:01:22 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Thu Jun 13 22:01:22 2013] Giving source the simple spatial ID 52 for pass 0, mean size = 14.12"
[Fri Jun 14 01:13:35 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52.ximg exists
[Fri Jun 14 01:13:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52.csv
[Fri Jun 14 01:13:35 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Jun 14 01:13:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52.csv
[Fri Jun 14 01:13:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 01:13:37 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Jun 14 01:13:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jun 14 01:13:37 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Jun 14 01:13:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52.csv
[Fri Jun 14 01:13:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112640101_pi300-10000_cl_pass0_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 14 05:18:37 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 15.413181 pixels away
[Fri Jun 14 05:18:37 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 05:18:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 05:18:37 2013] Assessing source extent using major
[Fri Jun 14 05:18:37 2013] Source does appear to be extended
[Fri Jun 14 05:18:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 14 08:29:51 2013] Using EEF radius (= 14.12 ")to estimate initial spatial extent for simple fitting
[Fri Jun 14 08:29:51 2013] Initial guess for spatial extent in simple fitting = 14.12"
[Fri Jun 14 08:29:51 2013] source mask rpix=3.2, npix_max = 56, mask sum = 49, frac = 0.873
[Fri Jun 14 08:29:51 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 14.12"
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src50.ximg exists
[Fri Jun 14 11:22:07 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Jun 14 11:22:07 2013] Fit fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_src50 appears to have run properly
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Jun 14 11:22:09 2013] fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Jun 14 11:22:09 2013] Fit fullrun_mos1_xmm0112640101_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Fri Jun 14 14:55:58 2013] Spatial fit model total counts = 333.286000, observed total counts = 309.000000
[Fri Jun 14 14:55:58 2013] Offset between fit and detection position for source 10 = 0.318461 pixels
[Fri Jun 14 14:55:58 2013] 332.412500 total counts/ 244.433000 bgd. counts: snr = 5.627319
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.318461 pixels
  Position = (475.2, 415.5) = 5 40 56.00 -1 47 25.8
  Extent = 7.3 (5.8-9.6)" x 4.1 (3.5-5.3)", rotation angle = 45 (28-66) degrees
  Source counts = 88.0 +/- 18.2
  Background counts = 244.4
  Rate = 0.003 +/- 0.0006
[Fri Jun 14 14:55:58 2013] Vigneting correction estimate = 1.000000
[Fri Jun 14 14:55:58 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 14 14:55:58 2013] Assessing source extent using major axis lower bound
[Fri Jun 14 14:55:58 2013] Source does appear to be extended
[Fri Jun 14 14:55:58 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Fri Jun 14 19:15:52 2013] XMMSAS src. selection expression = ellipse(41296.126000, 36097.589800, 436.497013, 243.459007, 45.158600, X, Y)
[Fri Jun 14 19:15:52 2013] Writing source region out to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_src.reg
[Fri Jun 14 19:15:52 2013] Extracting stamp from image fullrun_mos1_xmm0112640101_pi300-10000_cl_sm2.00.img.gz, (450, 390) - (500, 441)
[Fri Jun 14 19:15:52 2013] XMMSAS bgd. selection expression = annulus(41296.126000, 36097.589800, 727.495021, 1454.990042, X, Y)
[Fri Jun 14 19:15:52 2013] Writing fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10.gif
[Fri Jun 14 19:34:52 2013] Mean detx,y = (10329.82, 12853.90) 
[Fri Jun 14 19:34:53 2013] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 14 19:35:04 2013] Binned source spectrum to 10 counts/bin
[Fri Jun 14 19:35:05 2013] Setting source spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Jun 14 19:35:05 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Jun 14 21:23:15 2013] Not generating rmf since there are only 87 counts
[Fri Jun 14 21:23:15 2013] rmf not generated due to insufficient counts
[Fri Jun 14 23:52:32 2013] Updating aperture counts using extracted products
[Fri Jun 14 23:52:32 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 109.00
[Fri Jun 14 23:52:32 2013] Total counts from fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 244.00
[Fri Jun 14 23:52:32 2013] Got source and background scale factors 329600.000000, 3409931.000000
[Fri Jun 14 23:52:32 2013] User source parameters:
  Position = (475.2, 415.5) = 5 40 56.00 -1 47 25.8
  Extent = 7.3 (5.8-9.6)" x 4.1 (3.5-5.3)", rotation angle = 45 (28-66) degrees
  Source aperture counts = 85.4 +/- 11.5
  Background aperture counts = 23.6
  Rate = 0.003 +/- 0.0004

[Fri Jun 14 23:52:37 2013] Calculating source flux in energy range 0.30-8.00
[Fri Jun 14 23:52:37 2013] Using photon index=1.80, rate=0.00273, arf fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10.arf
[Fri Jun 14 23:52:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 14 23:52:37 2013] Updating source flux to 9.9e-14
[Fri Jun 14 23:52:54 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 14 23:53:17 2013] xmm0112640101/analysis//spectral/fullrun_mos1_xmm0112640101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete