[Wed Aug 8 17:44:54 2012] Detection parameters: Position = (343.0, 230.0) = 8 40 48.21 70 47 1.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 754.4 +/- 38.7 Background counts = 99.9 Rate = 0.04 +/- 0.002 [Wed Aug 8 17:44:55 2012] Off-axis axis estimate = 5.92' [Wed Aug 8 17:49:50 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting [Wed Aug 8 17:49:50 2012] Initial guess for spatial extent in simple fitting = 9.39" [Wed Aug 8 17:49:50 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.274 [Wed Aug 8 17:49:50 2012] Giving source the simple spatial ID 44 for pass 0, mean size = 9.39" [Wed Aug 8 23:25:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src44.ximg exists [Wed Aug 8 23:25:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src44_1.ximg exists [Wed Aug 8 23:25:42 2012] Fit fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src44 appears to have run properly [Wed Aug 8 23:25:43 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src44.ximg exists [Wed Aug 8 23:25:43 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src44_1.ximg exists [Wed Aug 8 23:25:43 2012] Fit fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src44 appears to have run properly [Thu Aug 9 00:53:31 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 12.970124 pixels away [Thu Aug 9 00:53:31 2012] Spatial fit model total counts = 2394.940000, observed total counts = 2418.000000 [Thu Aug 9 00:53:31 2012] Offset between fit and detection position for source 45 = 0.147989 pixels [Thu Aug 9 00:53:31 2012] Warning, changing simple spatial fit ID from 44 to 46 [Thu Aug 9 00:53:31 2012] 2308.411000 total counts/ 131.851000 bgd. counts: snr = 189.552244 Spatial fit parameters: Offset between fit and detection position for source 45 = 0.147989 pixels Position = (342.8, 229.9) = 8 40 48.32 70 47 1.8 Extent = 19.3 (19.3-19.3)", rotation angle = 0 Source counts = 2176.6 +/- 48.0 Background counts = 131.9 Rate = 0.08 +/- 0.002 [Thu Aug 9 00:53:31 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 00:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 00:53:31 2012] Assessing source extent using major axis lower bound [Thu Aug 9 00:53:31 2012] Source does appear to be extended [Thu Aug 9 00:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 00:53:31 2012] Source is confused with source 48 [Thu Aug 9 00:53:31 2012] Source is confused with source 49 [Thu Aug 9 00:53:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Thu Aug 9 00:53:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Thu Aug 9 00:53:46 2012] Initial guess for spatial extent in simple fitting = 19.26" [Thu Aug 9 00:53:46 2012] source mask rpix=4.4, npix_max = 97, mask sum = 100, frac = 1.030 [Thu Aug 9 00:53:46 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 19.26" [Thu Aug 9 04:48:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42.ximg exists [Thu Aug 9 04:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42.csv [Thu Aug 9 04:48:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42_1.ximg exists [Thu Aug 9 04:48:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42.csv [Thu Aug 9 04:48:43 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 9 04:48:44 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists [Thu Aug 9 04:48:44 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists [Thu Aug 9 04:48:44 2012] Fit fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly [Thu Aug 9 05:14:07 2012] Warning, spatial fit 42 centroid is now closest to src. 42 [Thu Aug 9 05:14:07 2012] Spatial fit model total counts = 2427.630000, observed total counts = 2418.000000 [Thu Aug 9 05:14:07 2012] Offset between fit and detection position for source 45 = 0.208596 pixels [Thu Aug 9 05:14:07 2012] Warning, changing simple spatial fit ID from 42 to 44 Spatial fit parameters: Offset between fit and detection position for source 45 = 0.208596 pixels Position = (342.6, 230.0) = 8 40 48.50 70 47 2.0 Extent = 17.8 (17.0-18.7)", rotation angle = 0 Source counts = 1895.1 +/- 43.5 Background counts = 0.0 Rate = 0.07 +/- 0.002 [Thu Aug 9 05:14:07 2012] Vigneting correction estimate = 1.000000 [Thu Aug 9 05:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 9 05:14:07 2012] Assessing source extent using major axis lower bound [Thu Aug 9 05:14:07 2012] Source does appear to be extended [Thu Aug 9 05:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 9 05:14:18 2012] Counts = 1895.110000, rescaling region sizes by 2.000000 [Thu Aug 9 05:14:18 2012] XMMSAS src. selection expression = ellipse(29760.560000, 19959.108000, 2138.484062, 2138.484062, 0.000000, X, Y) [Thu Aug 9 05:14:18 2012] Writing source region out to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45_src.reg [Thu Aug 9 05:14:18 2012] Extracting stamp from image fullrun_pn_xmm0112620101_pi300-10000_cl_sm2.00.img.gz, (220, 107) - (466, 353) [Thu Aug 9 05:14:18 2012] XMMSAS bgd. selection expression = annulus(29760.560000, 19959.108000, 7128.280205, 14256.560410, X, Y) && !ellipse(26223.480660, 27962.743200, 1652.640048, 1652.640048, 0.000000, X, Y) && !ellipse(30659.430400, 18049.992400, 2661.536077, 443.650413, 65.504800, X, Y) && !ellipse(30768.020000, 17739.238000, 1266.152036, 1266.152036, 0.000000, X, Y) && !ellipse(31286.140200, 16643.892800, 2170.184062, 448.609613, 65.197600, X, Y) && !ellipse(31609.288757, 15875.421860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.615474, 15416.300599, 1838.056053, 412.314661, 65.328574, X, Y) && !ellipse(32122.049800, 14808.182800, 907.512026, 907.512026, 0.000000, X, Y) && !ellipse(22368.233612, 34768.367401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.073700, 32723.941742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.732147, 32470.484680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.316223, 30668.598602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15855.291428, 30680.453308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.253174, 29732.060913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.072266, 29574.907074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25994.499176, 29188.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.586609, 29011.231079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40571.332184, 25681.678314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27231.530000, 25663.332000, 1142.792033, 1142.792033, 0.000000, X, Y) && !ellipse(27483.142000, 25036.194000, 1570.728045, 1570.728045, 0.000000, X, Y) && !ellipse(27785.951000, 24483.386000, 1174.336034, 396.395211, 244.443000, X, Y) && !ellipse(40553.275330, 24488.927643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28043.370500, 23907.005800, 1225.136035, 383.604811, 245.845000, X, Y) && !ellipse(25962.041443, 23625.201477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.502593, 23154.174138, 1359.664039, 670.787020, 90.000000, X, Y) && !ellipse(23677.123230, 23660.303619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.976771, 22471.291570, 1701.744049, 418.813440, 67.030599, X, Y) && !ellipse(28523.654600, 22810.937000, 1303.552038, 374.278411, 64.796400, X, Y) && !ellipse(28916.873993, 21958.631622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.880600, 21563.558000, 1359.664039, 1359.664039, 0.000000, X, Y) && !ellipse(25425.412231, 21075.862259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.150000, 20811.390000, 2626.976076, 2626.976076, 0.000000, X, Y) && !ellipse(19915.118400, 20650.337200, 562.668016, 562.668016, 0.000000, X, Y) && !ellipse(24254.208400, 19738.287200, 620.600018, 620.600018, 0.000000, X, Y) && !ellipse(30010.248000, 19314.724000, 2489.392072, 2489.392072, 0.000000, X, Y) && !ellipse(30247.784424, 18922.687927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.220000, 18550.212000, 1282.360037, 1282.360037, 0.000000, X, Y) && !ellipse(18739.814819, 16927.015244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23946.762695, 24037.904541, 1740.000000, 1740.000000, 0.000000, X, Y) [Thu Aug 9 05:14:18 2012] Writing fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45.gif [Thu Aug 9 07:09:16 2012] Mean detx,y = (36.51, 8469.37) [Thu Aug 9 07:09:23 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 9 07:15:56 2012] Binned source spectrum to 10 counts/bin [Thu Aug 9 07:15:56 2012] Setting source spectrum file to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45_src_b10.pi.gz [Thu Aug 9 07:15:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45_bgd.pi.gz [Thu Aug 9 10:38:56 2012] Updating aperture counts using extracted products [Thu Aug 9 10:38:57 2012] Error reading totcts from fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45_src_b10.pi.gz [Thu Aug 9 10:39:01 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 9 10:39:01 2012] Using photon index=1.80, rate=0.0672, arf fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src45.arf [Thu Aug 9 10:39:01 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 9 10:39:01 2012] Updating source flux to 2.2e-13 [Thu Aug 9 10:40:03 2012] Flag c found in src. 45 procflags, skipping spectral fitting