[Wed Aug  8 17:44:53 2012] Detection parameters:
  Position = (314.1, 295.1) = 8 41 13.55 70 51 44.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 739.3 +/- 41.0
  Background counts = 128.8
  Rate = 0.03 +/- 0.001

[Wed Aug  8 17:44:55 2012] Off-axis axis estimate = 1.16'
[Wed Aug  8 17:49:50 2012] Using EEF radius (= 7.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 17:49:50 2012] Initial guess for spatial extent in simple fitting = 7.01"
[Wed Aug  8 17:49:50 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.897
[Wed Aug  8 17:49:50 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 7.01"
[Wed Aug  8 23:25:41 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28.ximg exists
[Wed Aug  8 23:25:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28.csv
[Wed Aug  8 23:25:41 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Aug  8 23:25:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28.csv
[Wed Aug  8 23:25:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 23:25:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Aug  8 23:25:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Aug  8 23:25:42 2012] Fit fullrun_pn_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Aug  9 00:53:31 2012] Spatial fit model total counts = 3686.170000, observed total counts = 3687.000000
[Thu Aug  9 00:53:31 2012] Offset between fit and detection position for source 28 = 6.302898 pixels
[Thu Aug  9 00:53:31 2012] 3675.130000 total counts/ 2522.150000 bgd. counts: snr = 22.958120
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 6.302898 pixels
  Position = (311.4, 300.8) = 8 41 15.96 70 52 10.2
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 1153.0 +/- 60.6
  Background counts = 2522.2
  Rate = 0.04 +/- 0.002
[Thu Aug  9 00:53:31 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:53:31 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 00:53:31 2012] Source does appear to be extended
[Thu Aug  9 00:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:53:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 00:53:46 2012] Initial guess for spatial extent in simple fitting = 14.02"
[Thu Aug  9 00:53:46 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.884
[Thu Aug  9 00:53:46 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 14.02"
[Thu Aug  9 04:48:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Aug  9 04:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27.csv
[Thu Aug  9 04:48:42 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Aug  9 04:48:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27.csv
[Thu Aug  9 04:48:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 04:48:43 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Aug  9 04:48:43 2012] fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Aug  9 04:48:43 2012] Fit fullrun_pn_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Aug  9 05:14:07 2012] Warning, spatial fit 27 centroid is now closest to src. 29
[Thu Aug  9 05:14:07 2012] Spatial fit model total counts = 3102.630000, observed total counts = 3119.000000
[Thu Aug  9 05:14:07 2012] Offset between fit and detection position for source 28 = 5.644797 pixels
[Thu Aug  9 05:14:07 2012] Warning, changing simple spatial fit ID from 27 to 28
[Thu Aug  9 05:14:07 2012] 3091.050000 total counts/ 1914.660000 bgd. counts: snr = 26.884718
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 5.644797 pixels
  Position = (313.6, 295.5) = 8 41 14.06 70 51 47.5
  Extent = 14.3 (14.3-14.3)", rotation angle = 0
  Source counts = 1176.4 +/- 55.6
  Background counts = 1914.7
  Rate = 0.04 +/- 0.002
[Thu Aug  9 05:14:07 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:14:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:14:07 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 05:14:07 2012] Source does appear to be extended
[Thu Aug  9 05:14:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 05:14:07 2012] Source is confused with source 29
[Thu Aug  9 05:14:17 2012] Counts = 1176.390000, rescaling region sizes by 2.000000
[Thu Aug  9 05:14:17 2012] XMMSAS src. selection expression = ellipse(27231.530000, 25663.332000, 1714.188049, 1714.188049, 0.000000, X, Y)
[Thu Aug  9 05:14:17 2012] Writing source region out to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28_src.reg
[Thu Aug  9 05:14:17 2012] Extracting stamp from image fullrun_pn_xmm0112620101_pi300-10000_cl_sm2.00.img.gz, (215, 197) - (412, 394)
[Thu Aug  9 05:14:17 2012] XMMSAS bgd. selection expression = annulus(27231.530000, 25663.332000, 5713.960164, 11427.920329, X, Y) && !ellipse(26223.480660, 27962.743200, 1652.640048, 1652.640048, 0.000000, X, Y) && !ellipse(30659.430400, 18049.992400, 2661.536077, 443.650413, 65.504800, X, Y) && !ellipse(30768.020000, 17739.238000, 1266.152036, 1266.152036, 0.000000, X, Y) && !ellipse(31286.140200, 16643.892800, 2170.184062, 448.609613, 65.197600, X, Y) && !ellipse(31609.288757, 15875.421860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.615474, 15416.300599, 1838.056053, 412.314661, 65.328574, X, Y) && !ellipse(32122.049800, 14808.182800, 907.512026, 907.512026, 0.000000, X, Y) && !ellipse(34996.960114, 37714.151611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21614.692490, 37649.732635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27011.298401, 36263.401123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31458.345032, 35830.105652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21062.969437, 35738.220398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22639.845764, 35559.112122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22368.233612, 34768.367401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27955.073700, 32723.941742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26302.732147, 32470.484680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27709.316223, 30668.598602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15855.291428, 30680.453308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27314.253174, 29732.060913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.072266, 29574.907074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25994.499176, 29188.905640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25556.586609, 29011.231079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27483.142000, 25036.194000, 1570.728045, 1570.728045, 0.000000, X, Y) && !ellipse(27785.951000, 24483.386000, 1174.336034, 396.395211, 244.443000, X, Y) && !ellipse(28043.370500, 23907.005800, 1225.136035, 383.604811, 245.845000, X, Y) && !ellipse(25962.041443, 23625.201477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28392.502593, 23154.174138, 1359.664039, 670.787020, 90.000000, X, Y) && !ellipse(23677.123230, 23660.303619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28673.976771, 22471.291570, 1701.744049, 418.813440, 67.030599, X, Y) && !ellipse(28523.654600, 22810.937000, 1303.552038, 374.278411, 64.796400, X, Y) && !ellipse(28916.873993, 21958.631622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.880600, 21563.558000, 1359.664039, 1359.664039, 0.000000, X, Y) && !ellipse(25425.412231, 21075.862259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29344.150000, 20811.390000, 2626.976076, 2626.976076, 0.000000, X, Y) && !ellipse(19915.118400, 20650.337200, 562.668016, 562.668016, 0.000000, X, Y) && !ellipse(29760.560000, 19959.108000, 1425.656041, 1425.656041, 0.000000, X, Y) && !ellipse(24254.208400, 19738.287200, 620.600018, 620.600018, 0.000000, X, Y) && !ellipse(30010.248000, 19314.724000, 2489.392072, 2489.392072, 0.000000, X, Y) && !ellipse(30247.784424, 18922.687927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30476.220000, 18550.212000, 1282.360037, 1282.360037, 0.000000, X, Y) && !ellipse(18739.814819, 16927.015244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23946.762695, 24037.904541, 1740.000000, 1740.000000, 0.000000, X, Y)
[Thu Aug  9 05:14:17 2012] Writing fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28.gif
[Thu Aug  9 06:06:54 2012] Mean detx,y = (60.65, 1733.32) 
[Thu Aug  9 06:07:00 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 06:12:14 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 06:12:14 2012] Setting source spectrum file to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Aug  9 06:12:14 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Aug  9 10:38:55 2012] Updating aperture counts using extracted products
[Thu Aug  9 10:38:55 2012] Error reading totcts from fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Aug  9 10:39:00 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 10:39:00 2012] Using photon index=1.80, rate=0.0417, arf fullrun_pn_xmm0112620101_pi300-10000_pass1_cl_src28.arf
[Thu Aug  9 10:39:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 10:39:00 2012] Updating source flux to 9.7e-14
[Thu Aug  9 10:40:03 2012] Flag c found in src. 28 procflags, skipping spectral fitting