[Wed Aug  8 17:46:06 2012] Detection parameters:
  Position = (302.2, 321.9) = 8 41 24.14 70 53 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 136133.7 +/- 435.3
  Background counts = 46.3
  Rate = 4 +/- 0.01

[Wed Aug  8 17:46:07 2012] Off-axis axis estimate = 1.72'
[Thu Aug  9 00:03:18 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 00:03:18 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Aug  9 00:03:18 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Aug  9 00:03:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Aug  9 00:53:20 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 00:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 00:53:20 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 00:53:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 00:53:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:53:20 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 00:53:20 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 00:53:20 2012] Fit fullrun_mos2_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  9 00:53:37 2012] Spatial fit model total counts = 109821.000000, observed total counts = 112922.000000
[Thu Aug  9 00:53:37 2012] Offset between fit and detection position for source 1 = 0.162313 pixels
[Thu Aug  9 00:53:37 2012] 107185.660000 total counts/ 8714.860000 bgd. counts: snr = 1054.817336
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162313 pixels
  Position = (302.0, 322.0) = 8 41 24.28 70 53 42.5
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 98470.8 +/- 327.4
  Background counts = 8714.9
  Rate = 3 +/- 0.01
[Thu Aug  9 00:53:37 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:53:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:53:37 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 00:53:37 2012] Source does appear to be extended
[Thu Aug  9 00:53:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 04:51:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 04:51:02 2012] Initial guess for spatial extent in simple fitting = 6.70"
[Thu Aug  9 04:51:02 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.960
[Thu Aug  9 04:51:02 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.70"
[Thu Aug  9 05:13:56 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  9 05:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 05:13:56 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  9 05:13:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 05:13:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 05:13:56 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  9 05:13:56 2012] fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  9 05:13:56 2012] Fit fullrun_mos2_xmm0112620101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  9 05:14:08 2012] Spatial fit model total counts = 115078.000000, observed total counts = 112922.000000
[Thu Aug  9 05:14:08 2012] Offset between fit and detection position for source 1 = 0.120191 pixels
[Thu Aug  9 05:14:08 2012] 115366.100000 total counts/ 25600.000000 bgd. counts: snr = 561.038125
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.120191 pixels
  Position = (302.0, 321.9) = 8 41 24.30 70 53 42.0
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 89766.1 +/- 339.7
  Background counts = 25600.0
  Rate = 3 +/- 0.01
[Thu Aug  9 05:14:08 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 05:14:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 05:14:08 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 05:14:08 2012] Source does appear to be extended
[Thu Aug  9 05:14:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 10:23:23 2012] Counts = 89766.100000, rescaling region sizes by 3.000000
[Thu Aug  9 10:23:23 2012] XMMSAS src. selection expression = ellipse(26223.441220, 27953.490200, 1031.848230, 1031.848230, 0.000000, X, Y)
[Thu Aug  9 10:23:23 2012] Writing source region out to fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  9 10:23:23 2012] Extracting stamp from image fullrun_mos2_xmm0112620101_pi300-10000_cl_sm2.00.img.gz, (243, 263) - (361, 381)
[Thu Aug  9 10:23:23 2012] XMMSAS bgd. selection expression = annulus(26223.441220, 27953.490200, 5159.241148, 10318.482297, X, Y) && !ellipse(26717.633575, 28932.026245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27195.092804, 28160.132233, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  9 10:23:23 2012] Writing fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1.gif
[Thu Aug  9 10:23:45 2012] Mean detx,y = (98.67, 110.92) 
[Thu Aug  9 10:23:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 10:29:08 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 10:29:09 2012] Setting source spectrum file to fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 10:29:09 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  9 10:39:02 2012] Updating aperture counts using extracted products
[Thu Aug  9 10:39:02 2012] Error reading totcts from fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 10:39:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 10:39:03 2012] Using photon index=1.80, rate=2.67, arf fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 10:39:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 10:39:03 2012] Updating source flux to 2.8e-11
[Thu Aug  9 10:40:03 2012] Reading fit data from xmm0112620101/analysis//spectral/fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  9 10:40:03 2012] Spectral fit parameter nH value = 3.66448e+20
[Thu Aug  9 10:40:03 2012] Spectral fit parameter PhoIndex value = 1.37163
[Thu Aug  9 10:40:03 2012] Failed to get F(0.3-8.0) from xmm0112620101/analysis//spectral/fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 10:40:03 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 10:40:03 2012] Using Nh = 3.7e+20, photon index=1.37, rate=2.67, arf fullrun_mos2_xmm0112620101_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 10:40:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 10:40:03 2012] Updating source flux to 3.5e-11