[Wed Aug  8 17:45:36 2012] Detection parameters:
  Position = (192.9, 478.9) = 8 43 1.89 71 5 7.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.6 +/- 13.1
  Background counts = 25.6
  Rate = 0.002 +/- 0.0004

[Wed Aug  8 17:45:36 2012] Off-axis axis estimate = 15.16'
[Wed Aug  8 23:25:43 2012] Using EEF radius (= 14.01 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 23:25:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 23:25:43 2012] Initial guess for spatial extent in simple fitting = 14.01"
[Wed Aug  8 23:25:43 2012] source mask rpix=3.2, npix_max = 55, mask sum = 52, frac = 0.939
[Wed Aug  8 23:25:43 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 14.01"
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12.csv
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12.csv
[Thu Aug  9 00:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Aug  9 00:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:53:34 2012] Spatial fit model total counts = 388.452000, observed total counts = 236.000000
[Thu Aug  9 00:53:34 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  9 00:53:34 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:53:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:53:34 2012] Assessing source extent using major
[Thu Aug  9 00:53:34 2012] Source does appear to be extended
[Thu Aug  9 00:53:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:53:34 2012] Deleting source due to low Poisson probability 0.7