[Wed Aug  8 17:45:36 2012] Detection parameters:
  Position = (334.9, 343.5) = 8 40 55.07 70 55 19.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.3 +/- 10.4
  Background counts = 44.7
  Rate = 0.001 +/- 0.0004

[Wed Aug  8 17:45:36 2012] Off-axis axis estimate = 4.20'
[Wed Aug  8 23:25:43 2012] Using EEF radius (= 8.53 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 23:25:43 2012] Initial guess for spatial extent in simple fitting = 8.53"
[Wed Aug  8 23:25:43 2012] source mask rpix=2.0, npix_max = 24, mask sum = 23, frac = 0.949
[Wed Aug  8 23:25:43 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 8.53"
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17.csv
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17.csv
[Thu Aug  9 00:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Aug  9 00:03:18 2012] fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Aug  9 00:03:18 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Thu Aug  9 00:03:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112620101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 00:53:31 2012] Warning, spatial fit 36 centroid is now closest to src. 37
[Thu Aug  9 00:53:31 2012] Warning, spatial fit 39 centroid is now closest to src. 42
[Thu Aug  9 00:53:31 2012] Warning, spatial fit 48 centroid is now closest to src. 2
[Thu Aug  9 00:53:34 2012] Source 12 is offset by 8.051361 and -2.653076 pixels which is larger than
2 X fitted extent = 0.982529 x 0.982529, not incorporating fit results
[Thu Aug  9 00:53:34 2012] Spatial fit model total counts = -2182.880000, observed total counts = 390.000000
[Thu Aug  9 00:53:34 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  9 00:53:34 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 00:53:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 00:53:34 2012] Assessing source extent using major
[Thu Aug  9 00:53:34 2012] Source does appear to be extended
[Thu Aug  9 00:53:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 00:53:34 2012] Deleting source due to low Poisson probability 0.6