[Tue Jun 12 05:07:10 2012] Detection parameters:
  Position = (255.6, 320.7) = 15 59 25.69 35 5 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1013.0 +/- 40.5
  Background counts = 60.8
  Rate = 0.09 +/- 0.004

[Tue Jun 12 05:07:10 2012] Off-axis axis estimate = 3.50'
[Tue Jun 12 05:09:03 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 05:09:03 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Jun 12 05:09:03 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Tue Jun 12 05:09:03 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.18"
[Tue Jun 12 05:37:09 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2.ximg exists
[Tue Jun 12 05:37:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2.csv
[Tue Jun 12 05:37:09 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Jun 12 05:37:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2.csv
[Tue Jun 12 05:37:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 05:37:09 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Jun 12 05:37:09 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Jun 12 05:37:09 2012] Fit fullrun_pn_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Jun 12 05:59:36 2012] Source 2 is offset by 5.090466 and -8.133706 pixels which is larger than
2 X fitted extent = 0.939963 x 0.939963, not incorporating fit results
[Tue Jun 12 05:59:36 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:59:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:59:36 2012] Assessing source extent using major
[Tue Jun 12 05:59:36 2012] Source does appear to be extended
[Tue Jun 12 05:59:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 05:59:42 2012] Using EEF radius (= 8.18 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 05:59:42 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Tue Jun 12 05:59:42 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Tue Jun 12 05:59:42 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.18"
[Tue Jun 12 06:13:59 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jun 12 06:13:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2.csv
[Tue Jun 12 06:13:59 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jun 12 06:13:59 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2.csv
[Tue Jun 12 06:13:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 06:13:59 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jun 12 06:13:59 2012] fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jun 12 06:13:59 2012] Fit fullrun_pn_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jun 12 06:24:44 2012] Spatial fit model total counts = 920.735000, observed total counts = 921.000000
[Tue Jun 12 06:24:44 2012] Offset between fit and detection position for source 2 = 0.215460 pixels
[Tue Jun 12 06:24:44 2012] 917.343000 total counts/ 411.172000 bgd. counts: snr = 24.962351
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.215460 pixels
  Position = (255.5, 320.6) = 15 59 25.74 35 5 2.8
  Extent = 5.3 (4.9-5.7)", rotation angle = 0
  Source counts = 506.2 +/- 30.3
  Background counts = 411.2
  Rate = 0.05 +/- 0.003
[Tue Jun 12 06:24:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 06:24:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 06:24:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 06:24:44 2012] Source does appear to be extended
[Tue Jun 12 06:24:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 06:24:48 2012] XMMSAS src. selection expression = ellipse(22178.921000, 27840.721000, 316.853409, 316.853409, 0.000000, X, Y)
[Tue Jun 12 06:24:48 2012] Writing source region out to fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2_src.reg
[Tue Jun 12 06:24:48 2012] Extracting stamp from image fullrun_pn_xmm0112600801_pi300-10000_cl_sm2.00.img.gz, (237, 302) - (274, 339)
[Tue Jun 12 06:24:48 2012] XMMSAS bgd. selection expression = annulus(22178.921000, 27840.721000, 528.089015, 1056.178030, X, Y)
[Tue Jun 12 06:24:48 2012] Writing fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2.gif
[Tue Jun 12 06:27:45 2012] Mean detx,y = (765.83, 5259.99) 
[Tue Jun 12 06:27:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 06:27:53 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 06:27:54 2012] Setting source spectrum file to fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 06:27:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Jun 12 07:36:46 2012] Updating aperture counts using extracted products
[Tue Jun 12 07:36:46 2012] Error reading totcts from fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Jun 12 07:36:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 07:36:46 2012] Using photon index=1.80, rate=0.0464, arf fullrun_pn_xmm0112600801_pi300-10000_pass1_cl_src2.arf
[Tue Jun 12 07:36:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 07:36:46 2012] Updating source flux to 1.9e-13
[Tue Jun 12 07:37:12 2012] Flag b found in src. 2 procflags, skipping spectral fitting