[Tue Jun 12 05:07:43 2012] Detection parameters:
  Position = (300.6, 275.8) = 15 59 9.74 35 1 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 30299.1 +/- 206.1
  Background counts = 16.8
  Rate = 2 +/- 0.01

[Tue Jun 12 05:07:44 2012] Off-axis axis estimate = 1.65'
[Tue Jun 12 05:45:12 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 05:45:12 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 12 05:45:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.065
[Tue Jun 12 05:45:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 12 05:59:33 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 05:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 05:59:33 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 05:59:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 05:59:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 05:59:33 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 05:59:33 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 05:59:33 2012] Fit fullrun_mos2_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 05:59:38 2012] Spatial fit model total counts = 26805.300000, observed total counts = 26367.000000
[Tue Jun 12 05:59:38 2012] Offset between fit and detection position for source 3 = 0.129073 pixels
[Tue Jun 12 05:59:38 2012] 26781.340000 total counts/ 6116.540000 bgd. counts: snr = 264.227671
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.129073 pixels
  Position = (300.6, 275.7) = 15 59 9.74 35 1 47.7
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 20664.8 +/- 163.7
  Background counts = 6116.5
  Rate = 1 +/- 0.009
[Tue Jun 12 05:59:38 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:59:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:59:38 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 05:59:38 2012] Source does appear to be extended
[Tue Jun 12 05:59:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 06:19:31 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:19:31 2012] Initial guess for spatial extent in simple fitting = 5.28"
[Tue Jun 12 06:19:31 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.766
[Tue Jun 12 06:19:31 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.28"
[Tue Jun 12 06:24:42 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 06:24:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 06:24:42 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 06:24:42 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 06:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 06:24:42 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 06:24:42 2012] fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 06:24:42 2012] Fit fullrun_mos2_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 06:24:45 2012] Spatial fit model total counts = 26707.700000, observed total counts = 26323.000000
[Tue Jun 12 06:24:45 2012] Offset between fit and detection position for source 3 = 0.012908 pixels
[Tue Jun 12 06:24:45 2012] 26816.430000 total counts/ 6020.630000 bgd. counts: snr = 268.012261
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.012908 pixels
  Position = (300.6, 275.7) = 15 59 9.74 35 1 47.7
  Extent = 5.3 (5.2-5.4)", rotation angle = 0
  Source counts = 20795.8 +/- 163.8
  Background counts = 6020.6
  Rate = 1 +/- 0.009
[Tue Jun 12 06:24:45 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 06:24:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 06:24:45 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 06:24:45 2012] Source does appear to be extended
[Tue Jun 12 06:24:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 07:31:08 2012] Counts = 20795.800000, rescaling region sizes by 3.000000
[Tue Jun 12 07:31:08 2012] XMMSAS src. selection expression = ellipse(26106.337000, 23936.657400, 957.556828, 957.556828, 0.000000, X, Y)
[Tue Jun 12 07:31:08 2012] Writing source region out to fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 12 07:31:08 2012] Extracting stamp from image fullrun_mos2_xmm0112600801_pi300-10000_cl_sm2.00.img.gz, (246, 221) - (356, 331)
[Tue Jun 12 07:31:08 2012] XMMSAS bgd. selection expression = annulus(26106.337000, 23936.657400, 4787.784138, 9575.568276, X, Y)
[Tue Jun 12 07:31:08 2012] Writing fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3.gif
[Tue Jun 12 07:31:11 2012] Mean detx,y = (175.71, 72.96) 
[Tue Jun 12 07:31:12 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 07:32:52 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 07:32:52 2012] Setting source spectrum file to fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 07:32:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 12 07:36:46 2012] Updating aperture counts using extracted products
[Tue Jun 12 07:36:46 2012] Error reading totcts from fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 07:36:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 07:36:46 2012] Using photon index=1.80, rate=1.11, arf fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 07:36:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 07:36:46 2012] Updating source flux to 1.2e-11
[Tue Jun 12 07:37:12 2012] Reading fit data from xmm0112600801/analysis//spectral/fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jun 12 07:37:12 2012] Spectral fit parameter nH value = 3.8904e+12
[Tue Jun 12 07:37:12 2012] Spectral fit parameter PhoIndex value = 2.61365
[Tue Jun 12 07:37:12 2012] Failed to get F(0.3-8.0) from xmm0112600801/analysis//spectral/fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 07:37:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 07:37:12 2012] Using Nh = 3.9e+12, photon index=2.61, rate=1.11, arf fullrun_mos2_xmm0112600801_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 07:37:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 07:37:12 2012] Updating source flux to 9.2e-12