[Tue Jun 12 05:07:25 2012] Detection parameters:
  Position = (300.6, 275.8) = 15 59 9.74 35 1 47.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 29873.4 +/- 204.9
  Background counts = 16.5
  Rate = 2 +/- 0.01

[Tue Jun 12 05:07:25 2012] Off-axis axis estimate = 1.65'
[Tue Jun 12 05:37:09 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Tue Jun 12 05:37:09 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Tue Jun 12 05:37:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.064
[Tue Jun 12 05:37:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Tue Jun 12 05:45:11 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jun 12 05:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 05:45:11 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jun 12 05:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1.csv
[Tue Jun 12 05:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 05:45:11 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jun 12 05:45:11 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jun 12 05:45:11 2012] Fit fullrun_mos1_xmm0112600801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jun 12 05:59:37 2012] Spatial fit model total counts = 26301.200000, observed total counts = 26057.000000
[Tue Jun 12 05:59:37 2012] Offset between fit and detection position for source 3 = 0.164852 pixels
[Tue Jun 12 05:59:37 2012] 26386.590000 total counts/ 5923.390000 bgd. counts: snr = 265.881662
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.164852 pixels
  Position = (300.6, 275.6) = 15 59 9.75 35 1 47.4
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 20463.2 +/- 162.4
  Background counts = 5923.4
  Rate = 1 +/- 0.009
[Tue Jun 12 05:59:37 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 05:59:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 05:59:37 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 05:59:37 2012] Source does appear to be extended
[Tue Jun 12 05:59:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 06:13:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun 12 06:13:59 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Tue Jun 12 06:13:59 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.749
[Tue Jun 12 06:13:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Tue Jun 12 06:19:31 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jun 12 06:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 06:19:31 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jun 12 06:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1.csv
[Tue Jun 12 06:19:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 12 06:19:31 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jun 12 06:19:31 2012] fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jun 12 06:19:31 2012] Fit fullrun_mos1_xmm0112600801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jun 12 06:24:44 2012] Spatial fit model total counts = 26327.000000, observed total counts = 26090.000000
[Tue Jun 12 06:24:44 2012] Offset between fit and detection position for source 3 = 0.009524 pixels
[Tue Jun 12 06:24:44 2012] 26496.310000 total counts/ 5994.610000 bgd. counts: snr = 264.794773
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.009524 pixels
  Position = (300.6, 275.6) = 15 59 9.75 35 1 47.3
  Extent = 5.4 (5.3-5.4)", rotation angle = 0
  Source counts = 20501.7 +/- 162.8
  Background counts = 5994.6
  Rate = 1 +/- 0.009
[Tue Jun 12 06:24:44 2012] Vigneting correction estimate = 1.000000
[Tue Jun 12 06:24:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 12 06:24:44 2012] Assessing source extent using major axis lower bound
[Tue Jun 12 06:24:44 2012] Source does appear to be extended
[Tue Jun 12 06:24:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 12 07:06:19 2012] Counts = 20501.700000, rescaling region sizes by 3.000000
[Tue Jun 12 07:06:19 2012] XMMSAS src. selection expression = ellipse(26104.375800, 23930.256800, 968.360428, 968.360428, 0.000000, X, Y)
[Tue Jun 12 07:06:19 2012] Writing source region out to fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_src.reg
[Tue Jun 12 07:06:19 2012] Extracting stamp from image fullrun_mos1_xmm0112600801_pi300-10000_cl_sm2.00.img.gz, (245, 220) - (356, 331)
[Tue Jun 12 07:06:19 2012] XMMSAS bgd. selection expression = annulus(26104.375800, 23930.256800, 4841.802139, 9683.604279, X, Y) && !ellipse(16100.736938, 21272.135300, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun 12 07:06:19 2012] Writing fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3.gif
[Tue Jun 12 07:06:22 2012] Mean detx,y = (294.78, -323.47) 
[Tue Jun 12 07:06:23 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun 12 07:08:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jun 12 07:08:12 2012] Setting source spectrum file to fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 07:08:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jun 12 07:36:46 2012] Updating aperture counts using extracted products
[Tue Jun 12 07:36:46 2012] Error reading totcts from fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jun 12 07:36:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 07:36:46 2012] Using photon index=1.80, rate=1.09, arf fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 07:36:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 07:36:46 2012] Updating source flux to 1e-11
[Tue Jun 12 07:37:02 2012] Reading fit data from xmm0112600801/analysis//spectral/fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_pl.csv
[Tue Jun 12 07:37:02 2012] Spectral fit parameter nH value = 1.42141e+13
[Tue Jun 12 07:37:02 2012] Spectral fit parameter PhoIndex value = 2.58792
[Tue Jun 12 07:37:02 2012] Failed to get F(0.3-8.0) from xmm0112600801/analysis//spectral/fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Tue Jun 12 07:37:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun 12 07:37:02 2012] Using Nh = 1.4e+13, photon index=2.59, rate=1.09, arf fullrun_mos1_xmm0112600801_pi300-10000_pass1_cl_src3.arf
[Tue Jun 12 07:37:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 12 07:37:02 2012] Updating source flux to 8.2e-12