[Thu Jul 12 06:39:46 2012] Detection parameters:
  Position = (316.8, 257.9) = 20 46 19.98 -2 52 46.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.4 +/- 18.3
  Background counts = 10.9
  Rate = 0.03 +/- 0.003

[Thu Jul 12 06:39:47 2012] Off-axis axis estimate = 3.23'
[Thu Jul 12 06:41:10 2012] Using EEF radius (= 8.04 ")to estimate initial spatial extent for simple fitting
[Thu Jul 12 06:41:10 2012] Initial guess for spatial extent in simple fitting = 8.04"
[Thu Jul 12 06:41:10 2012] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.906
[Thu Jul 12 06:41:10 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.04"
[Thu Jul 12 07:55:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 12 07:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 07:55:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 12 07:55:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3.csv
[Thu Jul 12 07:55:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 07:55:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 12 07:55:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 12 07:55:28 2012] Fit fullrun_pn_xmm0112600501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 12 08:31:08 2012] Spatial fit model total counts = 279.000000, observed total counts = 279.000000
[Thu Jul 12 08:31:08 2012] Offset between fit and detection position for source 3 = 0.128981 pixels
[Thu Jul 12 08:31:08 2012] 279.788000 total counts/ 129.990000 bgd. counts: snr = 13.138659
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.128981 pixels
  Position = (316.9, 257.8) = 20 46 19.95 -2 52 47.1
  Extent = 5.5 (4.7-6.3)", rotation angle = 0
  Source counts = 149.8 +/- 16.7
  Background counts = 130.0
  Rate = 0.02 +/- 0.002
[Thu Jul 12 08:31:08 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 08:31:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 08:31:08 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 08:31:08 2012] Source does appear to be extended
[Thu Jul 12 08:31:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 08:31:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 12 08:31:21 2012] Initial guess for spatial extent in simple fitting = 5.51"
[Thu Jul 12 08:31:21 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.280
[Thu Jul 12 08:31:21 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.51"
[Thu Jul 12 09:30:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 12 09:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 12 09:30:28 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 12 09:30:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3.csv
[Thu Jul 12 09:30:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 12 09:30:29 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 12 09:30:29 2012] fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 12 09:30:29 2012] Fit fullrun_pn_xmm0112600501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 12 10:01:35 2012] Warning, spatial fit 3 centroid is now closest to src. 28
[Thu Jul 12 10:01:35 2012] Vigneting correction estimate = 1.000000
[Thu Jul 12 10:01:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 12 10:01:35 2012] Assessing source extent using major axis lower bound
[Thu Jul 12 10:01:35 2012] Source does appear to be extended
[Thu Jul 12 10:01:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 12 10:01:49 2012] XMMSAS src. selection expression = ellipse(27521.228740, 22381.548200, 330.836410, 330.836410, 0.000000, X, Y)
[Thu Jul 12 10:01:49 2012] Writing source region out to fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3_src.reg
[Thu Jul 12 10:01:49 2012] Extracting stamp from image fullrun_pn_xmm0112600501_pi300-10000_cl_sm2.00.img.gz, (298, 239) - (336, 277)
[Thu Jul 12 10:01:49 2012] XMMSAS bgd. selection expression = annulus(27521.228740, 22381.548200, 551.394016, 1102.788032, X, Y) && !ellipse(26186.034000, 23441.717400, 1789.960052, 561.104016, 112.503300, X, Y) && !ellipse(25944.866900, 22775.390000, 1228.448035, 289.096808, 284.153000, X, Y) && !ellipse(25837.708200, 22324.735000, 1264.008036, 320.096009, 104.119800, X, Y) && !ellipse(25783.384000, 22013.830000, 966.912028, 966.912028, 0.000000, X, Y) && !ellipse(25647.696594, 21524.969757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25191.118000, 20425.440000, 1370.976039, 1370.976039, 0.000000, X, Y)
[Thu Jul 12 10:01:49 2012] Writing fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3.gif
[Thu Jul 12 10:03:02 2012] Mean detx,y = (1467.56, 4420.71) 
[Thu Jul 12 10:03:04 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 12 10:03:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 12 10:03:18 2012] Setting source spectrum file to fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 10:03:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Jul 12 11:41:09 2012] Updating aperture counts using extracted products
[Thu Jul 12 11:41:09 2012] Error reading totcts from fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Jul 12 11:41:10 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 12 11:41:10 2012] Using photon index=1.80, rate=0.0189, arf fullrun_pn_xmm0112600501_pi300-10000_pass1_cl_src3.arf
[Thu Jul 12 11:41:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 12 11:41:10 2012] Updating source flux to 6.8e-14