[Sat Jun 16 15:03:12 2012] Detection parameters:
  Position = (123.5, 268.1) = 4 27 28.58 -57 14 49.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.4 +/- 9.4
  Background counts = 2.8
  Rate = 0.007 +/- 0.001

[Sat Jun 16 15:03:12 2012] Off-axis axis estimate = 12.87'
[Sat Jun 16 16:50:39 2012] Using EEF radius (= 12.86 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 16:50:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 16:50:39 2012] Initial guess for spatial extent in simple fitting = 12.86"
[Sat Jun 16 16:50:39 2012] source mask rpix=3.0, npix_max = 47, mask sum = 49, frac = 1.025
[Sat Jun 16 16:50:39 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.86"
[Sat Jun 16 17:03:23 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 16 17:03:23 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 16 17:03:23 2012] Fit fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Jun 16 17:03:23 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 16 17:03:23 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 16 17:03:23 2012] Fit fullrun_mos2_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun 16 17:03:28 2012] Spatial fit model total counts = 76.411900, observed total counts = 72.000000
[Sat Jun 16 17:03:28 2012] Offset between fit and detection position for source 2 = 0.106067 pixels
[Sat Jun 16 17:03:28 2012] 79.108300 total counts/ 36.394600 bgd. counts: snr = 7.080252
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.106067 pixels
  Position = (123.5, 268.2) = 4 27 28.56 -57 14 49.9
  Extent = 8.2 (6.2-11.2)" x 3.4 (3.2-5.1)", rotation angle = 79 (67-90) degrees
  Source counts = 42.7 +/- 8.9
  Background counts = 36.4
  Rate = 0.005 +/- 0.001
[Sat Jun 16 17:03:28 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:03:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:03:28 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 17:03:28 2012] Source does appear to be extended
[Sat Jun 16 17:03:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Sat Jun 16 17:50:19 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:50:19 2012] Initial guess for spatial extent in simple fitting = 5.78"
[Sat Jun 16 17:50:19 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.898
[Sat Jun 16 17:50:19 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.78"
[Sat Jun 16 18:00:20 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 16 18:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 18:00:20 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 16 18:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2.csv
[Sat Jun 16 18:00:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:00:20 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 16 18:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 16 18:00:20 2012] fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 16 18:00:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sat Jun 16 18:00:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 18:00:25 2012] Warning, spatial fit 2 centroid is now closest to src. 6
[Sat Jun 16 18:00:25 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:00:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:00:25 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 18:00:25 2012] Source does appear to be extended
[Sat Jun 16 18:00:25 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.21
[Sat Jun 16 18:15:43 2012] XMMSAS src. selection expression = ellipse(10699.896800, 23288.690000, 489.797414, 203.467806, 79.060264, X, Y)
[Sat Jun 16 18:15:43 2012] Writing source region out to fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2_src.reg
[Sat Jun 16 18:15:43 2012] Extracting stamp from image fullrun_mos2_xmm0112600401_pi300-10000_cl_sm2.00.img.gz, (95, 240) - (152, 296)
[Sat Jun 16 18:15:43 2012] XMMSAS bgd. selection expression = annulus(10699.896800, 23288.690000, 816.329023, 1632.658047, X, Y)
[Sat Jun 16 18:15:43 2012] Writing fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2.gif
[Sat Jun 16 18:16:05 2012] Mean detx,y = (-427.49, -16979.42) 
[Sat Jun 16 18:16:06 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 18:16:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 18:16:19 2012] Setting source spectrum file to fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 18:16:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun 16 18:17:24 2012] Not generating rmf since there are only 42 counts
[Sat Jun 16 18:17:24 2012] rmf not generated due to insufficient counts
[Sat Jun 16 18:17:58 2012] Updating aperture counts using extracted products
[Sat Jun 16 18:17:59 2012] Error reading totcts from fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun 16 18:17:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 18:17:59 2012] Using photon index=1.80, rate=0.00503, arf fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2.arf
[Sat Jun 16 18:17:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 18:17:59 2012] Updating source flux to 2.5e-13
[Sat Jun 16 18:18:00 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 16 18:18:01 2012] xmm0112600401/analysis//spectral/fullrun_mos2_xmm0112600401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete