[Sat Jun 16 15:02:54 2012] Detection parameters:
  Position = (232.5, 115.6) = 4 26 30.31 -57 25 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.5 +/- 8.4
  Background counts = 3.8
  Rate = 0.005 +/- 0.001

[Sat Jun 16 15:02:54 2012] Off-axis axis estimate = 14.09'
[Sat Jun 16 16:40:19 2012] Using EEF radius (= 13.47 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 16:40:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 16:40:19 2012] Initial guess for spatial extent in simple fitting = 13.47"
[Sat Jun 16 16:40:19 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.947
[Sat Jun 16 16:40:19 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.47"
[Sat Jun 16 16:50:39 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 16:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 16:50:39 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 16:50:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 16:50:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 16:50:39 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 16:50:39 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 16:50:39 2012] Fit fullrun_mos1_xmm0112600401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 16 17:03:26 2012] Spatial fit model total counts = 80.901700, observed total counts = 75.000000
[Sat Jun 16 17:03:26 2012] Offset between fit and detection position for source 8 = 0.208491 pixels
[Sat Jun 16 17:03:26 2012] 81.406100 total counts/ 55.887700 bgd. counts: snr = 3.413464
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.208491 pixels
  Position = (232.7, 115.6) = 4 26 30.20 -57 25 55.7
  Extent = 4.1 (3.4-5.7)", rotation angle = 0
  Source counts = 25.5 +/- 9.0
  Background counts = 55.9
  Rate = 0.003 +/- 0.001
[Sat Jun 16 17:03:26 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 17:03:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 17:03:26 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 17:03:26 2012] Source does appear to be extended
[Sat Jun 16 17:03:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 17:39:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 17:39:37 2012] Initial guess for spatial extent in simple fitting = 4.11"
[Sat Jun 16 17:39:37 2012] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.076
[Sat Jun 16 17:39:37 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 4.11"
[Sat Jun 16 17:50:19 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 17:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 17:50:19 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 17:50:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 17:50:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 17:50:19 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 17:50:19 2012] fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 17:50:19 2012] Fit fullrun_mos1_xmm0112600401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 16 18:00:23 2012] Spatial fit model total counts = 69.555000, observed total counts = 65.000000
[Sat Jun 16 18:00:23 2012] Offset between fit and detection position for source 8 = 0.022210 pixels
[Sat Jun 16 18:00:23 2012] 68.409000 total counts/ 43.478800 bgd. counts: snr = 3.780829
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.022210 pixels
  Position = (232.7, 115.6) = 4 26 30.21 -57 25 55.8
  Extent = 4.2 (3.0-5.8)", rotation angle = 0
  Source counts = 24.9 +/- 8.3
  Background counts = 43.5
  Rate = 0.003 +/- 0.001
[Sat Jun 16 18:00:23 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 18:00:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 18:00:23 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 18:00:23 2012] Source does appear to be extended
[Sat Jun 16 18:00:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 18:13:51 2012] XMMSAS src. selection expression = ellipse(20198.131000, 10007.712600, 252.573017, 252.573017, 0.000000, X, Y)
[Sat Jun 16 18:13:51 2012] Writing source region out to fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun 16 18:13:51 2012] Extracting stamp from image fullrun_mos1_xmm0112600401_pi300-10000_cl_sm2.00.img.gz, (218, 101) - (247, 130)
[Sat Jun 16 18:13:51 2012] XMMSAS bgd. selection expression = annulus(20198.131000, 10007.712600, 420.955029, 841.910057, X, Y)
[Sat Jun 16 18:13:51 2012] Writing fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8.gif
[Sat Jun 16 18:14:43 2012] Mean detx,y = (-8239.60, 14093.80) 
[Sat Jun 16 18:14:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 18:14:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 18:14:52 2012] Setting source spectrum file to fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 16 18:14:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun 16 18:15:29 2012] Not generating rmf since there are only 24 counts
[Sat Jun 16 18:15:29 2012] rmf not generated due to insufficient counts
[Sat Jun 16 18:17:58 2012] Updating aperture counts using extracted products
[Sat Jun 16 18:17:58 2012] Error reading totcts from fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 16 18:17:58 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 18:17:58 2012] Using photon index=1.80, rate=0.00293, arf fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8.arf
[Sat Jun 16 18:17:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 18:17:58 2012] Updating source flux to 1e-13
[Sat Jun 16 18:17:59 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Jun 16 18:18:00 2012] xmm0112600401/analysis//spectral/fullrun_mos1_xmm0112600401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete