[Tue Jun 25 01:04:08 2013] Detection parameters:
  Position = (266.1, 282.0) = 2 30 9.09 -9 0 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.1 +/- 10.7
  Background counts = 14.4
  Rate = 0.007 +/- 0.002

[Tue Jun 25 01:04:08 2013] Off-axis axis estimate = 2.63'
[Tue Jun 25 01:32:58 2013] Using EEF radius (= 7.74 ")to estimate initial spatial extent for simple fitting
[Tue Jun 25 01:32:58 2013] Initial guess for spatial extent in simple fitting = 7.74"
[Tue Jun 25 01:32:58 2013] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.577
[Tue Jun 25 01:32:58 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 7.74"
[Tue Jun 25 01:49:47 2013] fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6.ximg exists
[Tue Jun 25 01:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6.csv
[Tue Jun 25 01:49:47 2013] fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Jun 25 01:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6.csv
[Tue Jun 25 01:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 01:49:47 2013] fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Jun 25 01:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 25 01:49:47 2013] fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Jun 25 01:49:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Jun 25 01:49:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112600301_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun 25 01:49:53 2013] Source 5 is offset by 4.145331 and -2.058593 pixels which is larger than
2 X fitted extent = 1.410975 x 1.410975, not incorporating fit results
[Tue Jun 25 01:49:53 2013] Warning, spatial fit 6 centroid is now closest to src. 4
[Tue Jun 25 01:49:53 2013] Vigneting correction estimate = 1.000000
[Tue Jun 25 01:49:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun 25 01:49:53 2013] Assessing source extent using major
[Tue Jun 25 01:49:53 2013] Source does appear to be extended
[Tue Jun 25 01:49:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun 25 01:49:53 2013] Deleting source due to low Poisson probability 0.9