[Wed Aug 15 10:13:21 2012] Detection parameters:
  Position = (289.8, 293.0) = 10 45 2.74 -59 42 56.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.3 +/- 18.4
  Background counts = 85.5
  Rate = 0.02 +/- 0.004

[Wed Aug 15 10:13:24 2012] Off-axis axis estimate = 0.74'
[Wed Aug 15 10:16:28 2012] Using EEF radius (= 6.80 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:16:28 2012] Initial guess for spatial extent in simple fitting = 6.80"
[Wed Aug 15 10:16:28 2012] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.705
[Wed Aug 15 10:16:28 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 6.80"
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45.ximg exists
[Wed Aug 15 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45.csv
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45_1.ximg exists
[Wed Aug 15 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45.csv
[Wed Aug 15 13:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45.csv
[Wed Aug 15 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:47 2012] Spatial fit model total counts = 1647.460000, observed total counts = 1518.000000
[Wed Aug 15 17:24:47 2012] Offset between fit and detection position for source 45 = 1.250044 pixels
[Wed Aug 15 17:24:47 2012] Warning, changing simple spatial fit ID from 45 to 42
[Wed Aug 15 17:24:47 2012] 1691.824000 total counts/ 1551.410000 bgd. counts: snr = 3.564898
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 1.250044 pixels
  Position = (289.5, 291.8) = 10 45 2.96 -59 42 50.8
  Extent = 10.1 (5.4-13.5)", rotation angle = 0
  Source counts = 140.4 +/- 41.1
  Background counts = 1551.4
  Rate = 0.02 +/- 0.005
[Wed Aug 15 17:24:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:47 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 17:24:47 2012] Source does appear to be extended
[Wed Aug 15 17:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:24:47 2012] Source is confused with source 42
[Wed Aug 15 17:25:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:25:18 2012] Initial guess for spatial extent in simple fitting = 10.11"
[Wed Aug 15 17:25:18 2012] source mask rpix=2.3, npix_max = 31, mask sum = 13, frac = 0.408
[Wed Aug 15 17:25:18 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug 15 23:25:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:12 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:12 2012] Source does appear to be extended
[Wed Aug 15 23:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:25:31 2012] XMMSAS src. selection expression = ellipse(25135.289400, 25336.348000, 606.546017, 606.546017, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing source region out to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45_src.reg
[Wed Aug 15 23:25:31 2012] Extracting stamp from image fullrun_pn_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (255, 257) - (324, 327)
[Wed Aug 15 23:25:31 2012] XMMSAS bgd. selection expression = annulus(25135.289400, 25336.348000, 1010.910029, 2021.820058, X, Y) && !ellipse(25047.434600, 27435.912400, 1646.652047, 1510.886443, 8.039200, X, Y) && !ellipse(23617.026642, 23528.027405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26711.025208, 26318.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.342163, 25796.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.318000, 25468.076000, 2462.496071, 2462.496071, 0.000000, X, Y) && !ellipse(24522.802337, 24418.044730, 1130.984033, 1130.984033, 347.227829, X, Y) && !ellipse(23089.780304, 24191.673218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27499.104279, 24059.274872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23668.098600, 23059.079400, 1264.944036, 348.436810, 80.898060, X, Y)
[Wed Aug 15 23:25:31 2012] Writing fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45.gif
[Thu Aug 16 00:16:44 2012] Mean detx,y = (-1948.04, 1137.12) 
[Thu Aug 16 00:16:47 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:17:11 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:17:11 2012] Setting source spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug 16 00:17:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Thu Aug 16 03:47:14 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:14 2012] Error reading totcts from fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Thu Aug 16 03:47:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:15 2012] Using photon index=1.80, rate=0.0156, arf fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src45.arf
[Thu Aug 16 03:47:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:15 2012] Updating source flux to 1.2e-13
[Thu Aug 16 03:50:40 2012] Flag c found in src. 45 procflags, skipping spectral fitting