[Wed Aug 15 10:13:21 2012] Detection parameters:
  Position = (279.5, 327.3) = 10 45 8.67 -59 40 21.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.7 +/- 20.2
  Background counts = 63.7
  Rate = 0.01 +/- 0.002

[Wed Aug 15 10:13:24 2012] Off-axis axis estimate = 2.50'
[Wed Aug 15 10:16:28 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:16:28 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Aug 15 10:16:28 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.633
[Wed Aug 15 10:16:28 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 7.68"
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src39.ximg exists
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Aug 15 13:49:33 2012] Fit fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src39 appears to have run properly
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39.csv
[Wed Aug 15 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:47 2012] Source 39 is offset by 4.833878 and -2.611810 pixels which is larger than
2 X fitted extent = 2.022855 x 2.022855, not incorporating fit results
[Wed Aug 15 17:24:47 2012] Source 39 is offset by -5.530398 and 0.672284 pixels which is larger than
2 X fitted extent = 2.496782 x 2.496782, not incorporating fit results
[Wed Aug 15 17:24:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:47 2012] Assessing source extent using major
[Wed Aug 15 17:24:47 2012] Source does appear to be extended
[Wed Aug 15 17:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:25:18 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:25:18 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Wed Aug 15 17:25:18 2012] source mask rpix=1.8, npix_max = 20, mask sum = 13, frac = 0.633
[Wed Aug 15 17:25:18 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 7.68"
[Wed Aug 15 20:59:36 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29.ximg exists
[Wed Aug 15 20:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29.csv
[Wed Aug 15 20:59:36 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29_1.ximg exists
[Wed Aug 15 20:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29.csv
[Wed Aug 15 20:59:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Wed Aug 15 20:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Wed Aug 15 20:59:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29.csv
[Wed Aug 15 20:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 23:25:12 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 39 at 10.795782 pixels away
[Wed Aug 15 23:25:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:12 2012] Assessing source extent using major
[Wed Aug 15 23:25:12 2012] Source does appear to be extended
[Wed Aug 15 23:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:25:31 2012] XMMSAS src. selection expression = ellipse(24267.997345, 28423.646545, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing source region out to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39_src.reg
[Wed Aug 15 23:25:31 2012] Extracting stamp from image fullrun_pn_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (242, 290) - (317, 365)
[Wed Aug 15 23:25:31 2012] XMMSAS bgd. selection expression = annulus(24267.997345, 28423.646545, 1087.500000, 2175.000000, X, Y) && !ellipse(25047.434600, 27435.912400, 1646.652047, 1510.886443, 8.039200, X, Y) && !ellipse(26711.025208, 26318.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.342163, 25796.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.318000, 25468.076000, 2462.496071, 2462.496071, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39.gif
[Thu Aug 16 00:02:57 2012] Mean detx,y = (60.08, -1087.04) 
[Thu Aug 16 00:02:59 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 00:03:19 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 00:03:19 2012] Setting source spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug 16 00:03:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Thu Aug 16 01:16:01 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 01:16:01 2012] rmf not generated due to insufficient counts
[Thu Aug 16 03:47:14 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:14 2012] Error reading totcts from fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Thu Aug 16 03:47:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:15 2012] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src39.arf
[Thu Aug 16 03:47:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:15 2012] Updating source flux to 6.8e-14
[Thu Aug 16 03:50:40 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting