[Wed Aug 15 10:13:19 2012] Detection parameters:
  Position = (426.2, 226.0) = 10 43 44.15 -59 47 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.8 +/- 17.4
  Background counts = 42.9
  Rate = 0.02 +/- 0.002

[Wed Aug 15 10:13:24 2012] Off-axis axis estimate = 10.65'
[Wed Aug 15 10:16:28 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:16:28 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Wed Aug 15 10:16:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.829
[Wed Aug 15 10:16:28 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.75"
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19.ximg exists
[Wed Aug 15 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19.csv
[Wed Aug 15 13:49:33 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19_1.ximg exists
[Wed Aug 15 13:49:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19.csv
[Wed Aug 15 13:49:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Wed Aug 15 13:49:34 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19.csv
[Wed Aug 15 13:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:47 2012] Spatial fit model total counts = -78.504900, observed total counts = 636.000000
[Wed Aug 15 17:24:47 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 17:24:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:47 2012] Assessing source extent using major
[Wed Aug 15 17:24:47 2012] Source does appear to be extended
[Wed Aug 15 17:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:24:47 2012] Source is confused with source 18
[Wed Aug 15 17:25:18 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:25:18 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Wed Aug 15 17:25:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 34, frac = 0.829
[Wed Aug 15 17:25:18 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.75"
[Wed Aug 15 20:59:36 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19.ximg exists
[Wed Aug 15 20:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19.csv
[Wed Aug 15 20:59:36 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Aug 15 20:59:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19.csv
[Wed Aug 15 20:59:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Aug 15 20:59:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Aug 15 20:59:37 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19.csv
[Wed Aug 15 20:59:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 23:25:12 2012] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.909196 pixels away
[Wed Aug 15 23:25:12 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 15.440397 pixels away
[Wed Aug 15 23:25:12 2012] Spatial fit model total counts = 2500.150000, observed total counts = 2481.000000
[Wed Aug 15 23:25:12 2012] Offset between fit and detection position for source 19 = 2.209438 pixels
[Wed Aug 15 23:25:12 2012] Warning, changing simple spatial fit ID from 19 to 51
[Wed Aug 15 23:25:12 2012] 2475.360000 total counts/ 1021.190000 bgd. counts: snr = 45.505292
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 2.209438 pixels
  Position = (424.0, 225.8) = 10 43 45.43 -59 47 36.5
  Extent = 46.0 (45.9-92.0)", rotation angle = 0
  Source counts = 1454.2 +/- 49.8
  Background counts = 1021.2
  Rate = 0.2 +/- 0.006
[Wed Aug 15 23:25:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:12 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:12 2012] Source does appear to be extended
[Wed Aug 15 23:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:25:31 2012] Counts = 1454.170000, rescaling region sizes by 2.000000
[Wed Aug 15 23:25:31 2012] XMMSAS src. selection expression = ellipse(36839.434000, 19596.512000, 5522.040159, 5522.040159, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing source region out to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19_src.reg
[Wed Aug 15 23:25:31 2012] Extracting stamp from image fullrun_pn_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (107, 0) - (595, 543)
[Wed Aug 15 23:25:31 2012] XMMSAS bgd. selection expression = annulus(36839.434000, 19596.512000, 18406.800530, 36813.601059, X, Y) && !ellipse(33075.968200, 24879.607800, 495.585614, 495.585614, 0.000000, X, Y) && !ellipse(25047.434600, 27435.912400, 1646.652047, 1510.886443, 8.039200, X, Y) && !ellipse(27861.669769, 35843.587891, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33427.298828, 35212.681244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15189.244141, 24820.285919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29538.219860, 23594.826800, 484.660014, 484.660014, 0.000000, X, Y) && !ellipse(24323.471960, 21367.190400, 432.452012, 432.452012, 0.000000, X, Y) && !ellipse(35113.985840, 37263.901123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29003.170140, 37184.069800, 335.760810, 335.760810, 0.000000, X, Y) && !ellipse(36442.915619, 36574.294434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29881.905457, 30148.186310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34258.416800, 28997.070940, 467.004813, 467.004813, 0.000000, X, Y) && !ellipse(19690.627274, 17878.102493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28395.161800, 25269.183400, 1191.488034, 448.516813, 32.532000, X, Y) && !ellipse(23617.026642, 23528.027405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35290.576000, 20657.380000, 1600.152046, 554.171216, 33.935100, X, Y) && !ellipse(28327.447160, 20374.871800, 397.751211, 397.751211, 0.000000, X, Y) && !ellipse(36594.118000, 19846.880000, 1804.096052, 1804.096052, 0.000000, X, Y) && !ellipse(25906.697357, 11293.062988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27892.128265, 41353.047150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28440.683868, 36398.815582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34512.178000, 35522.442000, 1943.768056, 1943.768056, 0.000000, X, Y) && !ellipse(33618.915770, 33276.512600, 489.364814, 489.364814, 0.000000, X, Y) && !ellipse(20311.629333, 15799.465454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19262.230331, 30707.271759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24267.997345, 28423.646545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18972.613600, 26537.068400, 426.471212, 426.471212, 0.000000, X, Y) && !ellipse(26711.025208, 26318.611877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25118.342163, 25796.633118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.318000, 25468.076000, 2462.496071, 2462.496071, 0.000000, X, Y) && !ellipse(25135.289400, 25336.348000, 808.728023, 808.728023, 0.000000, X, Y) && !ellipse(24522.802337, 24418.044730, 1130.984033, 1130.984033, 347.227829, X, Y) && !ellipse(28809.892000, 25045.536000, 812.464023, 812.464023, 0.000000, X, Y) && !ellipse(29147.752000, 24611.228000, 1231.248035, 1231.248035, 0.000000, X, Y) && !ellipse(30794.271759, 24515.007996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29668.276489, 24307.498871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23089.780304, 24191.673218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27499.104279, 24059.274872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30564.590100, 23873.242600, 663.814419, 663.814419, 0.000000, X, Y) && !ellipse(31238.836000, 23375.956600, 1459.320042, 1459.320042, 0.000000, X, Y) && !ellipse(31728.621704, 23095.082397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23668.098600, 23059.079400, 1264.944036, 348.436810, 80.898060, X, Y) && !ellipse(30443.133514, 22292.929016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25418.108246, 22404.965942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32934.612000, 22283.576000, 1600.152046, 1600.152046, 0.000000, X, Y) && !ellipse(33206.552756, 22075.488895, 1600.152046, 476.840412, 34.500549, X, Y) && !ellipse(34044.991394, 21460.394135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.073114, 21176.871232, 1600.152046, 513.482605, 34.427927, X, Y) && !ellipse(35917.668000, 20305.204000, 1840.680053, 1840.680053, 0.000000, X, Y) && !ellipse(27782.814000, 19053.336000, 1468.328042, 1468.328042, 0.000000, X, Y) && !ellipse(19841.601532, 18594.110794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22678.970276, 41512.871948, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19.gif
[Wed Aug 15 23:46:35 2012] Mean detx,y = (-662.52, 11833.82) 
[Wed Aug 15 23:46:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:57:40 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:57:40 2012] Setting source spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Wed Aug 15 23:57:40 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Aug 16 03:47:13 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:13 2012] Error reading totcts from fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Thu Aug 16 03:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:14 2012] Using photon index=1.80, rate=0.162, arf fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src19.arf
[Thu Aug 16 03:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:14 2012] Updating source flux to 1.2e-12
[Thu Aug 16 03:50:40 2012] Flag p found in src. 19 procflags, skipping spectral fitting
[Thu Aug 16 03:50:40 2012] Flag c found in src. 19 procflags, skipping spectral fitting