[Wed Aug 15 10:13:19 2012] Detection parameters:
  Position = (394.5, 333.9) = 10 44 2.64 -59 39 47.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 204.9 +/- 21.6
  Background counts = 78.7
  Rate = 0.04 +/- 0.004

[Wed Aug 15 10:13:24 2012] Off-axis axis estimate = 7.42'
[Wed Aug 15 10:16:28 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 10:16:28 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Wed Aug 15 10:16:28 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.936
[Wed Aug 15 10:16:28 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.14"
[Wed Aug 15 13:49:32 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12.ximg exists
[Wed Aug 15 13:49:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12.csv
[Wed Aug 15 13:49:32 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12_1.ximg exists
[Wed Aug 15 13:49:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12.csv
[Wed Aug 15 13:49:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Wed Aug 15 13:49:34 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Wed Aug 15 13:49:34 2012] Fit fullrun_pn_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Wed Aug 15 17:24:47 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.907531 pixels away
[Wed Aug 15 17:24:47 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:47 2012] Assessing source extent using major
[Wed Aug 15 17:24:47 2012] Source does appear to be extended
[Wed Aug 15 17:24:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:25:18 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 17:25:18 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Wed Aug 15 17:25:18 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.936
[Wed Aug 15 17:25:18 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 10.14"
[Wed Aug 15 20:59:35 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12.ximg exists
[Wed Aug 15 20:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12.csv
[Wed Aug 15 20:59:35 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Aug 15 20:59:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12.csv
[Wed Aug 15 20:59:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Aug 15 20:59:37 2012] fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Aug 15 20:59:37 2012] Fit fullrun_pn_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Aug 15 23:25:12 2012] Spatial fit model total counts = 1052.000000, observed total counts = 1052.000000
[Wed Aug 15 23:25:12 2012] Offset between fit and detection position for source 12 = 0.172343 pixels
[Wed Aug 15 23:25:12 2012] 1044.358000 total counts/ 898.465000 bgd. counts: snr = 4.867252
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.172343 pixels
  Position = (394.3, 333.9) = 10 44 2.74 -59 39 47.0
  Extent = 5.8 (4.8-7.2)", rotation angle = 0
  Source counts = 145.9 +/- 32.3
  Background counts = 898.5
  Rate = 0.02 +/- 0.004
[Wed Aug 15 23:25:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:12 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:12 2012] Source does appear to be extended
[Wed Aug 15 23:25:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:25:31 2012] XMMSAS src. selection expression = ellipse(34258.416800, 28997.070940, 350.253610, 350.253610, 0.000000, X, Y)
[Wed Aug 15 23:25:31 2012] Writing source region out to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12_src.reg
[Wed Aug 15 23:25:31 2012] Extracting stamp from image fullrun_pn_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (374, 314) - (414, 354)
[Wed Aug 15 23:25:31 2012] XMMSAS bgd. selection expression = annulus(34258.416800, 28997.070940, 583.756017, 1167.512034, X, Y)
[Wed Aug 15 23:25:31 2012] Writing fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12.gif
[Wed Aug 15 23:42:04 2012] Mean detx,y = (6101.69, 6733.53) 
[Wed Aug 15 23:42:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 15 23:42:18 2012] Binned source spectrum to 10 counts/bin
[Wed Aug 15 23:42:19 2012] Setting source spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Wed Aug 15 23:42:19 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug 16 03:47:13 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:13 2012] Error reading totcts from fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug 16 03:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:14 2012] Using photon index=1.80, rate=0.0162, arf fullrun_pn_xmm0112580701_pi300-10000_pass1_cl_src12.arf
[Thu Aug 16 03:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:14 2012] Updating source flux to 9.7e-14