[Wed Aug 15 10:14:29 2012] Detection parameters:
  Position = (321.0, 414.6) = 10 44 44.90 -59 33 55.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1425.3 +/- 46.2
  Background counts = 11.4
  Rate = 0.3 +/- 0.009

[Wed Aug 15 10:14:30 2012] Off-axis axis estimate = 8.58'
[Wed Aug 15 15:10:31 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:10:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 15:10:31 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Wed Aug 15 15:10:31 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.825
[Wed Aug 15 15:10:31 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.72"
[Wed Aug 15 17:24:28 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3.ximg exists
[Wed Aug 15 17:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 17:24:28 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Aug 15 17:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3.csv
[Wed Aug 15 17:24:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Aug 15 17:24:29 2012] Fit fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Aug 15 17:25:06 2012] Warning, spatial fit 3 centroid is now closest to src. 18
[Wed Aug 15 17:25:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:25:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:25:06 2012] Assessing source extent using major
[Wed Aug 15 17:25:06 2012] Source does appear to be extended
[Wed Aug 15 17:25:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 22:21:03 2012] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 22:21:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 15 22:21:03 2012] Initial guess for spatial extent in simple fitting = 10.72"
[Wed Aug 15 22:21:03 2012] source mask rpix=2.5, npix_max = 35, mask sum = 29, frac = 0.825
[Wed Aug 15 22:21:03 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.72"
[Wed Aug 15 23:25:01 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3.ximg exists
[Wed Aug 15 23:25:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 23:25:01 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Aug 15 23:25:01 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3.csv
[Wed Aug 15 23:25:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 23:25:01 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Aug 15 23:25:01 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Aug 15 23:25:01 2012] Fit fullrun_mos2_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Aug 15 23:25:20 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.239102 pixels away
[Wed Aug 15 23:25:20 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 68.946926 pixels away
[Wed Aug 15 23:25:20 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:20 2012] Assessing source extent using major
[Wed Aug 15 23:25:20 2012] Source does appear to be extended
[Wed Aug 15 23:25:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 03:10:17 2012] Counts = 1425.291504, rescaling region sizes by 2.000000
[Thu Aug 16 03:10:17 2012] XMMSAS src. selection expression = ellipse(27876.001617, 36022.271362, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Aug 16 03:10:17 2012] Writing source region out to fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3_src.reg
[Thu Aug 16 03:10:17 2012] Extracting stamp from image fullrun_mos2_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (246, 340) - (396, 490)
[Thu Aug 16 03:10:17 2012] XMMSAS bgd. selection expression = annulus(27876.001617, 36022.271362, 4350.000000, 8700.000000, X, Y) && !ellipse(25056.571800, 27440.883800, 1385.258440, 1267.260036, 332.150200, X, Y) && !ellipse(35094.940800, 37264.452600, 643.480019, 643.480019, 0.000000, X, Y) && !ellipse(33400.806000, 35233.091200, 717.236821, 717.236821, 0.000000, X, Y) && !ellipse(24688.049530, 28404.302002, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35422.436000, 36743.828000, 1986.392057, 1182.984034, 301.445000, X, Y)
[Thu Aug 16 03:10:17 2012] Writing fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3.gif
[Thu Aug 16 03:14:18 2012] Mean detx,y = (-8262.99, 2367.48) 
[Thu Aug 16 03:14:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 03:15:33 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 03:15:33 2012] Setting source spectrum file to fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 03:15:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Aug 16 03:26:39 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug 16 03:26:39 2012] rmf not generated due to insufficient counts
[Thu Aug 16 03:47:16 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:16 2012] Error reading totcts from fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Aug 16 03:47:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:16 2012] Using photon index=1.80, rate=0.286, arf fullrun_mos2_xmm0112580701_pi300-10000_pass1_cl_src3.arf
[Thu Aug 16 03:47:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:16 2012] Updating source flux to 4.8e-12
[Thu Aug 16 03:49:16 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting