[Wed Aug 15 10:14:30 2012] Detection parameters:
  Position = (299.0, 325.6) = 10 44 57.50 -59 40 25.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.9 +/- 10.4
  Background counts = 8.0
  Rate = 0.007 +/- 0.002

[Wed Aug 15 10:14:30 2012] Off-axis axis estimate = 1.97'
[Wed Aug 15 15:10:31 2012] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 15:10:31 2012] Initial guess for spatial extent in simple fitting = 7.41"
[Wed Aug 15 15:10:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 11, frac = 0.566
[Wed Aug 15 15:10:31 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 7.41"
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18.ximg exists
[Wed Aug 15 17:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18.csv
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18_1.ximg exists
[Wed Aug 15 17:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18.csv
[Wed Aug 15 17:24:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Wed Aug 15 17:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Aug 15 17:24:29 2012] fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Wed Aug 15 17:24:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18.csv
[Wed Aug 15 17:24:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:25:06 2012] Source 25 is offset by 6.776385 and 6.419574 pixels which is larger than
2 X fitted extent = 5.596046 x 3.056722, not incorporating fit results
[Wed Aug 15 17:25:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:25:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:25:06 2012] Assessing source extent using major
[Wed Aug 15 17:25:06 2012] Source does appear to be extended
[Wed Aug 15 17:25:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:25:06 2012] Deleting source due to low Poisson probability 0.9