[Wed Aug 15 10:14:00 2012] Detection parameters:
  Position = (318.1, 408.5) = 10 44 46.56 -59 34 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.7 +/- 19.1
  Background counts = 13.5
  Rate = 0.008 +/- 0.002

[Wed Aug 15 10:14:00 2012] Off-axis axis estimate = 8.10'
[Wed Aug 15 13:49:35 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:49:35 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Aug 15 13:49:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.679
[Wed Aug 15 13:49:35 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 10.48"
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24.csv
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24_1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24.csv
[Wed Aug 15 15:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:10:31 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24.ximg exists
[Wed Aug 15 15:10:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Aug 15 15:10:31 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists
[Wed Aug 15 15:10:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24.csv
[Wed Aug 15 15:10:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 17:24:58 2012] Source 23 is offset by 7.554596 and 2.974823 pixels which is larger than
2 X fitted extent = 1.311835 x 1.311835, not incorporating fit results
[Wed Aug 15 17:24:58 2012] Spatial fit model total counts = -304.444000, observed total counts = 1723.000000
[Wed Aug 15 17:24:58 2012] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 15 17:24:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:58 2012] Assessing source extent using major
[Wed Aug 15 17:24:58 2012] Source does appear to be extended
[Wed Aug 15 17:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 17:24:58 2012] Source is confused with source 3
[Wed Aug 15 20:59:38 2012] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 20:59:38 2012] Initial guess for spatial extent in simple fitting = 10.48"
[Wed Aug 15 20:59:38 2012] source mask rpix=2.4, npix_max = 33, mask sum = 23, frac = 0.679
[Wed Aug 15 20:59:38 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.48"
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22.ximg exists
[Wed Aug 15 22:21:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22.csv
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22_1.ximg exists
[Wed Aug 15 22:21:03 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22.csv
[Wed Aug 15 22:21:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Wed Aug 15 22:21:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Wed Aug 15 22:21:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22.csv
[Wed Aug 15 22:21:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 23:25:18 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.223254 pixels away
[Wed Aug 15 23:25:18 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:18 2012] Assessing source extent using major
[Wed Aug 15 23:25:18 2012] Source does appear to be extended
[Wed Aug 15 23:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:00:25 2012] XMMSAS src. selection expression = ellipse(27622.711823, 35489.271576, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing source region out to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23_src.reg
[Thu Aug 16 02:00:25 2012] Extracting stamp from image fullrun_mos1_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (281, 371) - (356, 446)
[Thu Aug 16 02:00:25 2012] XMMSAS bgd. selection expression = annulus(27622.711823, 35489.271576, 1087.500000, 2175.000000, X, Y) && !ellipse(27862.476898, 36042.324799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.292786, 37201.274292, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23.gif
[Thu Aug 16 02:15:46 2012] Mean detx,y = (2578.09, 7991.47) 
[Thu Aug 16 02:15:46 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 02:15:59 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 02:16:00 2012] Setting source spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Aug 16 02:16:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Thu Aug 16 03:05:10 2012] Not generating rmf since there are only 89 counts
[Thu Aug 16 03:05:10 2012] rmf not generated due to insufficient counts
[Thu Aug 16 03:47:15 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:15 2012] Error reading totcts from fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Aug 16 03:47:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:16 2012] Using photon index=1.80, rate=0.00816, arf fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src23.arf
[Thu Aug 16 03:47:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:16 2012] Updating source flux to 1.4e-13
[Thu Aug 16 03:47:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting