[Wed Aug 15 10:13:59 2012] Detection parameters:
  Position = (288.5, 316.0) = 10 45 3.53 -59 41 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 21626.3 +/- 176.1
  Background counts = 28.2
  Rate = 2 +/- 0.02

[Wed Aug 15 10:14:00 2012] Off-axis axis estimate = 1.47'
[Wed Aug 15 13:49:35 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:49:35 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Aug 15 13:49:35 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Wed Aug 15 13:49:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.16"
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1.csv
[Wed Aug 15 15:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 15 15:10:30 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Aug 15 17:24:58 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Wed Aug 15 17:24:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:58 2012] Assessing source extent using major
[Wed Aug 15 17:24:58 2012] Source does appear to be extended
[Wed Aug 15 17:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 20:59:38 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 20:59:38 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Wed Aug 15 20:59:38 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.085
[Wed Aug 15 20:59:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.16"
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Aug 15 22:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Aug 15 22:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1.csv
[Wed Aug 15 22:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Aug 15 22:21:03 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Aug 15 23:25:18 2012] Spatial fit model total counts = 22571.200000, observed total counts = 22609.000000
[Wed Aug 15 23:25:18 2012] Offset between fit and detection position for source 2 = 0.097584 pixels
[Wed Aug 15 23:25:18 2012] 22658.120000 total counts/ 6633.220000 bgd. counts: snr = 196.758330
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.097584 pixels
  Position = (288.5, 316.1) = 10 45 3.49 -59 41 5.1
  Extent = 7.1 (7.1-7.2)", rotation angle = 0
  Source counts = 16024.9 +/- 150.5
  Background counts = 6633.2
  Rate = 1 +/- 0.01
[Wed Aug 15 23:25:18 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:18 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:18 2012] Source does appear to be extended
[Wed Aug 15 23:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 23:25:18 2012] Source is confused with source 6
[Thu Aug 16 02:00:25 2012] Counts = 16024.900000, rescaling region sizes by 3.000000
[Thu Aug 16 02:00:25 2012] XMMSAS src. selection expression = ellipse(25054.207600, 27448.791400, 1284.233437, 1284.233437, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing source region out to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_src.reg
[Thu Aug 16 02:00:25 2012] Extracting stamp from image fullrun_mos1_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (215, 242) - (362, 390)
[Thu Aug 16 02:00:25 2012] XMMSAS bgd. selection expression = annulus(25054.207600, 27448.791400, 6421.167185, 12842.334370, X, Y) && !ellipse(33070.830400, 24895.033200, 761.615222, 574.061617, 310.382600, X, Y) && !ellipse(27862.476898, 36042.324799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35167.464000, 37189.358000, 1556.552045, 1111.536032, 89.548963, X, Y) && !ellipse(29626.581400, 23523.607400, 755.561622, 755.561622, 0.000000, X, Y) && !ellipse(25078.466278, 25091.382996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33379.602824, 35247.069977, 830.909344, 542.483720, 0.000000, X, Y) && !ellipse(24940.228000, 28049.886000, 1223.232035, 1223.232035, 0.000000, X, Y) && !ellipse(24319.416920, 21383.395200, 345.043210, 345.043210, 0.000000, X, Y) && !ellipse(33647.048200, 33304.457600, 547.656016, 547.656016, 0.000000, X, Y) && !ellipse(19747.424988, 17875.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29837.462921, 30315.299164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35746.602325, 36337.226868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15191.521580, 24973.240400, 381.514411, 381.514411, 0.000000, X, Y) && !ellipse(23593.038452, 23545.444397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30474.627472, 22295.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28343.843400, 20422.286400, 641.622418, 641.622418, 0.000000, X, Y) && !ellipse(18941.542800, 26608.322400, 553.115216, 553.115216, 0.000000, X, Y) && !ellipse(28978.292786, 37201.274292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32453.412842, 24247.590790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27534.276720, 24059.078200, 369.357611, 369.357611, 0.000000, X, Y) && !ellipse(27622.711823, 35489.271576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28245.780823, 25398.551300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36382.988953, 36671.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30785.990723, 24459.124939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23879.356960, 37111.941600, 620.129618, 620.129618, 0.000000, X, Y) && !ellipse(36064.558000, 38987.630000, 2074.592060, 2074.592060, 0.000000, X, Y) && !ellipse(35030.527649, 40858.040833, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2.gif
[Thu Aug 16 02:00:30 2012] Mean detx,y = (164.43, -554.63) 
[Thu Aug 16 02:00:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 02:07:18 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 02:07:18 2012] Setting source spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug 16 02:07:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 16 03:47:15 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:15 2012] Error reading totcts from fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Aug 16 03:47:15 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:15 2012] Using photon index=1.80, rate=1.46, arf fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2.arf
[Thu Aug 16 03:47:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:15 2012] Updating source flux to 1.6e-11
[Thu Aug 16 03:47:18 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Aug 16 03:49:16 2012] Reading fit data from xmm0112580701/analysis//spectral/fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_pl.csv
[Thu Aug 16 03:49:16 2012] Spectral fit parameter nH value = 4.576e+14
[Thu Aug 16 03:49:16 2012] Spectral fit parameter PhoIndex value = 0.244709
[Thu Aug 16 03:49:16 2012] Failed to get F(0.3-8.0) from xmm0112580701/analysis//spectral/fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Thu Aug 16 03:49:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:49:16 2012] Using Nh = 4.6e+14, photon index=0.24, rate=1.46, arf fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src2.arf
[Thu Aug 16 03:49:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:49:16 2012] Updating source flux to 3.2e-11