[Wed Aug 15 10:13:59 2012] Detection parameters:
  Position = (340.3, 271.4) = 10 44 33.70 -59 44 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.1 +/- 29.4
  Background counts = 23.3
  Rate = 0.06 +/- 0.004

[Wed Aug 15 10:14:00 2012] Off-axis axis estimate = 3.62'
[Wed Aug 15 13:49:35 2012] Using EEF radius (= 8.24 ")to estimate initial spatial extent for simple fitting
[Wed Aug 15 13:49:35 2012] Initial guess for spatial extent in simple fitting = 8.24"
[Wed Aug 15 13:49:35 2012] source mask rpix=1.9, npix_max = 22, mask sum = 17, frac = 0.742
[Wed Aug 15 13:49:35 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.24"
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5.csv
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5_1.ximg exists
[Wed Aug 15 15:10:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5.csv
[Wed Aug 15 15:10:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Wed Aug 15 15:10:30 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Aug 15 15:10:30 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Aug 15 17:24:58 2012] Spatial fit model total counts = 704.305000, observed total counts = 743.000000
[Wed Aug 15 17:24:58 2012] Offset between fit and detection position for source 10 = 0.883903 pixels
[Wed Aug 15 17:24:58 2012] 702.731000 total counts/ 360.622000 bgd. counts: snr = 18.015171
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.883903 pixels
  Position = (341.1, 270.9) = 10 44 33.25 -59 44 21.3
  Extent = 9.4 (8.3-10.9)", rotation angle = 0
  Source counts = 342.1 +/- 26.5
  Background counts = 360.6
  Rate = 0.03 +/- 0.002
[Wed Aug 15 17:24:58 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 17:24:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 17:24:58 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 17:24:58 2012] Source does appear to be extended
[Wed Aug 15 17:24:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 15 20:59:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 15 20:59:38 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Wed Aug 15 20:59:38 2012] source mask rpix=2.2, npix_max = 28, mask sum = 27, frac = 0.946
[Wed Aug 15 20:59:38 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 9.44"
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5.ximg exists
[Wed Aug 15 22:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5.csv
[Wed Aug 15 22:21:02 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Aug 15 22:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5.csv
[Wed Aug 15 22:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Aug 15 22:21:03 2012] fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Aug 15 22:21:03 2012] Fit fullrun_mos1_xmm0112580701_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Aug 15 23:25:18 2012] Warning, spatial fit 5 centroid is now closest to src. 34
[Wed Aug 15 23:25:18 2012] Vigneting correction estimate = 1.000000
[Wed Aug 15 23:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 15 23:25:18 2012] Assessing source extent using major axis lower bound
[Wed Aug 15 23:25:18 2012] Source does appear to be extended
[Wed Aug 15 23:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 16 02:00:25 2012] XMMSAS src. selection expression = ellipse(29626.581400, 23523.607400, 566.671216, 566.671216, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing source region out to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10_src.reg
[Thu Aug 16 02:00:25 2012] Extracting stamp from image fullrun_mos1_xmm0112580701_pi300-10000_cl_sm2.00.img.gz, (309, 238) - (374, 304)
[Thu Aug 16 02:00:25 2012] XMMSAS bgd. selection expression = annulus(29626.581400, 23523.607400, 944.452027, 1888.904054, X, Y) && !ellipse(30474.627472, 22295.496429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27534.276720, 24059.078200, 369.357611, 369.357611, 0.000000, X, Y) && !ellipse(28245.780823, 25398.551300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30785.990723, 24459.124939, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug 16 02:00:25 2012] Writing fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10.gif
[Thu Aug 16 02:11:30 2012] Mean detx,y = (-5794.16, -1291.57) 
[Thu Aug 16 02:11:31 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 16 02:11:41 2012] Binned source spectrum to 10 counts/bin
[Thu Aug 16 02:11:41 2012] Setting source spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug 16 02:11:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Thu Aug 16 03:47:15 2012] Updating aperture counts using extracted products
[Thu Aug 16 03:47:15 2012] Error reading totcts from fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Thu Aug 16 03:47:16 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug 16 03:47:16 2012] Using photon index=1.80, rate=0.0311, arf fullrun_mos1_xmm0112580701_pi300-10000_pass1_cl_src10.arf
[Thu Aug 16 03:47:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug 16 03:47:16 2012] Updating source flux to 5.1e-13